Summary of Contents for Kenmore CSV Go 125.10438910
Use & Care Guide Kenmore ® CSV|Go ™ Cordless Stick Vac Model/Modelo: 125.10438910 Vacuum Cleaner Help Line: 1-877-531-7321 8:00am-5:00pm EST, M-F Transform SR Brands Management LLC Hoffman Estates, IL 60179 USA www.kenmore.com...
Troubleshooting ......................17-18 BEFORE USING YOUR NEW VACUUM CLEANER Read this Use & Care Guide. It will help you assemble and operate your new Kenmore vacuum cleaner in the safest and most effective way. For more information about vacuum cleaner care and operation, call the Vacuum Cleaner Help Line at 1-877-531-7321.
• To recharge vacuum, use only Kenmore • Do not handle charger, including charger model 052-52632 charging adapter. plug, and charger terminals with wet •...
IMPORTANT SAFETY INSTRUCTIONS • Do not pick up hard or sharp objects such of fire. as glass, nail, screws or coins that could • You are responsible for making sure damage the vacuum cleaner. that your vacuum cleaner is not used •...
KENMORE VACUUM CLEANER WARRANTY KENMORE LIMITED WARRANTY FOR ONE YEAR from the date of sale, this product is warranted against defects in material or workmanship when it is assembled, operated and maintained according to all supplied instructions. WITH PROOF OF SALE, a defective appliance will be replaced free of charge.
PARTS AND FEATURES It is important to know your vacuum cleaners parts and features to assure its proper and safe use. Review these before using your vacuum. REPLACEMENT PARTS Item Part No. HEPA Filter 561051107 Pre-filter Basket 561051101 Brush Roll 561051103 2-in-1 Combination Tool 561051104...
PARTS AND FEATURES Hand Vacuum Charging Adapter Wand Motorized Nozzle Wall Mountable Bracket 2-in-1 Combination Tool Screw (2) - 7 -...
PARTS AND FEATURES The motorized nozzle and the combination tool can be inserted into either the hand vacuum or the wand. You will hear a click if the motorized nozzle installed correctly. Combination Tool The combination brush can be used as a crevice tool or as a dusting brush.
ASSEMBLY INSTRUCTIONS Before assembling the vacuum cleaner, check the PACKING LIST (Page 2). Use this list to verify that you have received all the components of your new Kenmore CSV Go Cordless Stick Vac. 1. Insert the hand vacuum into the top of 4.
CHARGING The battery requires approximately 4 hours WARNING of charging to regain full capacity. While the unit is charging, the battery indicator Before charging make sure the unit is ring will flash blue. When the battery is fully turned OFF. charged, the battery indicator will show a continuous blue light, and turn off after 15 1.
OPERATING INSTRUCTIONS CAUTION Moving parts! To reduce the risk of personal injury, DO NOT touch the brush roll when vacuum is on. Contacting the brush roll while it is rotating can cut, bruise or cause other injuries. Always turn off before servicing. Use caution when operating near children or pets.
VACUUM OPERATION To start the vacuum, press the on/off trigger When vacuuming on plush carpet, use ECO button. Once turned on, the battery level mode for best performance. indicator will be lit. NOTE: When battery power decreases The vacuum starts in the ECO speed to about 10% remaining, the battery level position.
VACUUM MAINTENANCE AND CARE CAUTION To reduce the risk of electric shock, remove the charging adapter from the unit, and make sure the unit is turned off before any maintenance. EMPTYING DUST CUP AND CLEANING FILTER Dust Cup Emptying Filter Cleaning For best performance, empty dust cup If there is hair wrapped or blocked in the after every use or once dust reaches max...
EMPTYING DUST CUP AND CLEANING FILTER 2. Remove the HEPA filter and pre-filter 5. To reassemble the dust cup to the hand basket from the dust cup. vacuum, align the tabs on the dust cup with slots in the hand vacuum. Once aligned, attach the dust cup to the hand HEPA Filter vacuum until you hear a click.
CLEANING THE MOTORIZED NOZZLE & BLOCKAGES The brush roll may accumulate debris 4. Place the brush roll back into the such as strings, hair and fibers. This type housing by aligning the hexagon end of of debris can wrap around the brush and the brush roll into the right end of the diminish its ability to clean effectively.
CLEANING THE MOTORIZED NOZZLE & BLOCKAGES 2. Carefully remove any debris or blockage CAUTION from the inside of the hose. Reattach the motorized nozzle onto the wand. Do not use scissors or other sharp objects to remove a blockage from the hose. 3.
TROUBLESHOOTING Review the table for solutions to minor performance problems. Any service needed, other than maintenance described in this Use & Care Guide, should be performed by a qualified service dealer. WARNING Disconnect electrical supply before performing maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury.
TROUBLESHOOTING The dust cup is installed incorrectly. Reinstall the dust cup correctly as instructed on page 14. The hand vacuum and the wand Reinstall the hand vacuum and the wand correctly are not connected into place. as instructed on page 9. The motorized nozzle and the Reinstall the motorized nozzle and the wand Brush roll in the...