Kenmore SPOTLITE GO KW1050 Use & Care Manual page 11

FILLING THE CLEAN WATER TANK
IMPORTANT!
the spot cleaner, thoroughly
vacuum the area to be cleaned.
Always test a small hidden
area for colorfastness and pile
distortion.
Test Colorfastness - Gently
rub surface with a dampened
white cloth containing cleaning
solution. Wait 10 minutes and
check for color removal with
a white paper towel. If color
changes, do not use.
NOTE:
To prevent staining,
use plastic or aluminum foil to
protect wood or metal surfaces
from possible water spray.
To protect the wood floors
underneath rugs or carpet, place
waterproof material (e.g. plastic)
underneath them before cleaning.
NOTE:
Always refer to and
follow the manufactures care
guidelines before using cleaning
solution and spot cleaner.
1. Unwrap the hose from the
unit. Make sure the tough stain
nozzle is attached securely.
USING THE SPOT CLEANER
Before using
5. Slide the clean water tank back
onto the unit. The security
latch will automatically secure
once the clean water tank is in
position. A click will be heard
when correctly installed.
NOTE:
The tough stain nozzle
can be used for cleaning carpet
stains, furniture and other hard-
to-reach surfaces.
2. Turn the power cord hooks
inward from either side to
release the power cord.
3. Detach the power cord plug
from the power cord.
4. Plug the power cord into an
outlet located near the floor.
- 11 -