Panel Information Page - AMX Modero ViewPoint MVP-8400i Operation/Reference Manual

Setup Pages

Panel Information Page

The Panel Information page provides detailed panel information (FIG. 71).
FIG. 71 Panel Information page (takes its' information from the touch panel)
Features on this page include:
Panel Information Page
Back:
Connection Status icon:
Panel Type:
Firmware Version:
Setup Port:
High Port:
High Address:
High Channel:
High Level:
Serial Number:
Setup Pages Version:
Screen Width:
Screen Height:
94
Saves all changes and returns to the previous page.
The icon in the upper-right corner of each Setup page shows online/offline state
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark
green every 5 seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain
yellow for 3 missed blink messages and then turn red. It will return to green
when a blink message is received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Displays the model of the panel being used.
Displays the version number of the G4 firmware loaded on the panel.
Displays the setup port information (value) being used by the panel.
Displays the high port (port count) value for the panel.
Displays the high address (address count) value for the panel.
Displays the high channel (channel count) value for the panel.
Displays the high level (level count) value being used by the panel.
Displays the specific serial number value assigned to the panel.
Displays the type and version of the Setup pages being used by the panel.
Displays the screen width (in pixels).
• MVP-8400 = 800
Displays the screen height (in pixels).
• MVP-8400 = 600 pixels.
MVP-8400i Modero Viewpoint Wireless Touch Panels