AMX Modero ViewPoint MVP-8400i Operation/Reference Manual page 167

SIP Commands (Cont.)
^PHN-PRIVACY
Indicates the state
of the privacy
feature.
^PHN-REDIAL
Indicates the
panel is redialing
the number.
^PHN-
TRANSFERRED
Indicates a call
has been
transferred.
The following table lists and describes SIP commands that are sent to the touch panel to manage calls.
SIP Commands
^PHN-ANSWER
Answers the call.
^PHN-
AUTOANSWER
Enables or
disables the
auto-answer
feature of the
phone.
?PHN-
AUTOANSWER
Queries the state
of the
auto-answer
feature.
^PHN-CALL
Calls the provided
number.
MVP-8400i Modero Viewpoint Wireless Touch Panels
Syntax:
"'^PHN-PRIVACY, <state>'"
Variable:
state = 0 or 1 (1 indicates new messages)
new message count = The number of new messages.
old message count = The number of old messages.
new urgent message count = The number of new messages marked urgent.
old urgent message count = The number of old messages marked urgent.
Example:
SEND_COMMAND Panel,"'^PHN-MSGWAITING, 1, 1, 2, 1, 0'"
Syntax:
"'^PHN-REDIAL, <number>'"
Variable:
number = The phone number to dial.
Example:
SEND_COMMAND Panel,"'^PHN-REDIAL, 2125551000'"
Syntax:
"'^PHN-TRANSFERRED'"
Example:
SEND_COMMAND Panel,"'^PHN-TRANSFERRED'"
Syntax:
"'^PHN-ANSWER, <connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-ANSWER, 1'"
Enables (1) or disables (0) the auto-answer feature on the phone.
Syntax:
"'^PHN-AUTOANSWER, <0 or 1>'"
Example:
SEND_COMMAND Panel,"'^PHN-AUTOANSWER, 1'"
Enables the auto-answer feature.
The panel responds with the ^PHN-AUTOANSWER, <state> message.
Syntax:
"'?PHN-AUTOANSWER'"
Example:
SEND_COMMAND Panel,"'?PHN-AUTOANSWER'"
Syntax:
"'?PHN-CALL, <number>'"
Variable:
number = The provided phone number
Example:
SEND_COMMAND Panel,"'?PHN-CALL, 2125551000'"
Programming
157