Before Connecting; In Using - Pylontech UF5000 Series Operation Manual

2.1

Before Connecting

Warning
1) After unpacking, please check the product and packing list first, if the
product is damaged or lack of parts, please contact the local retailer.
2) Before installation, be sure to cut off the grid power supply and make sure
the battery is in power-off mode.
3) Wiring must be done correctly, without mistaking the positive and
negative cables, and ensuring no short circuit with external devices.
4) DO NOT connect the battery with AC power directly.
5) The embedded BMS in the battery is designed for
connect battery in series.
6) The battery must be grounded with a resistance of less than 0.1Ω.
7) Make sure that the electrical parameters of battery system are compatible
with related equipment.
8) Keep the battery away from water and fire.
2.2

In Using

1) If the battery system needs to be moved or repaired, the power must be
cut off and the battery must be completely shut down.
2) DO NOT connect the battery with different type of battery.
3) DO NOT connect batteries with faulty or incompatible inverter
4) DO NOT disassemble the battery (QC tab removed or damaged).
5) In case of fire, dry powder fire extinguisher or vast amount of water can be
used.
6) DO NOT open, repair or disassemble the battery unless by staff from
Pylontech or authorized by Pylontech. We do not undertake any
consequences or related responsibility due to violation of safety
operation or violation of design, production and equipment safety
standards.
4
51.2 VDC. DO NOT