INDEX Summary INTRODUCTION---------------------------------------------------------------------------------------------------------------- 3 INSTRUCTIONS FOR THE USE AND MAINTENANCE OF SITREX MINI-BINDER -------------------------------- 3 TECHNICAL DATA AND CHARACTERISTICS OF MINI-BINDER ------------------------------------------------------ 3 TECHNICAL DATA OF THE FINISHED PRODUCT ( BALES OF GRASS) ------------------------------------------- 4 TECHNICAL DATA AND CHARACTERISTICS OF THE PLASTIC WRAPPING FILM ------------------------------ 4...
MINI-BINDER MF70 INTRODUCTION Thank you for buying a SITREX MINI-BINDER: we congratulate you on a wise choice. Your purchase has been an excellent investment, will last for years and help you in your work, because highly advanced materials and know -how have gone into the contruction and assembly of MINI-BINDER.
MINI-BINDER MF70 TECHNICAL DATA OF THE FINISHED PRODUCT ( BALES OF GRASS) Bale dimensions height 52 cm Diameter 55 cm Bale weight 40 to 50 kg Hourly output 2400 to 3000 kg TECHNICAL DATA AND CHARACTERISTICS OF THE PLASTIC WRAPPING FILM...
MINI-BINDER is a farming machine for wrapping grass bales to be ensilaged. The SITREX MINI-BINDER consists of a tubular steel frame supported by a bearing bridge for one single wheel, and of a rotating cradle designed to house the bale of grass to be wrapped.
MINI-BINDER MF70 DESCRIPTION OF THE CONTROLS 1. Selector switch selects the type of wrapping, i.e. 2-layer or 4-layer ( pic.3). PIC. 3 2. Wrapping start lever starts up the previously selected wrapping mode (pic.4) PIC. 4...
MINI-BINDER MF70 USE THE MINI-BINDER Make sure that the machine is stable and the brakes are applied. Release the side props, adjust them to the machine position and lock them again. Pic.5. FIG. 5 Start up the tractor and couple the drive.
Page 8
MINI-BINDER MF70 PIC. 7 Place the bale of grass on the candle of the wrapper making sure it rests firmly on the cradle’s rollers, pic. 8. PIC. 8 After taking account of all safety rules connected to the machine, press the starting...
Page 9
MINI-BINDER MF70 FIG. 9 TROUBLE CAUSE SOLUTION The film tears 1. Faulty roll. 1. Remove the damaged portion 2. film cardboard tube warped ( humidity) 2. replace the roll and widen the hole of the tube 3. mounting error 3. check the mounting 1.
MINI-BINDER MF70 FIG. 13 TRANSPORT, HANDLING AND HOISTING The following rules must be observed when transporting MINI-BINDER by lorry: 1. make sure that the ropes can bear the weight of the machine and that they do not rest on cover guards or fragile parts;...
Page 12
MINI-BINDER MF70 when hoisting with a travelling crane, the operator must keep at a safe distance from the raised machine, depending on the length of the rope used, pic. 15-16. PIC. 14 PIC. 15...
Keep at a safe distance from all moving parts. Always use original SITREX spare parts to make sure of the original features. The certification is otherwise not valid. ATTENTION MINI-BINDER may be dangerous if used improperly and may even cause lethal wounds.
MINI-BINDER is a farming implement and cannot travel on the road but must be loaded on a vehicle with permit to circulate. The SITREX mini wrapper is designed for use on sloping land but it must have a safety margin sufficient to assure the stability of the machine and prevent it from capsizing.
PIC. 19 CONDITIONS OF GUARANTEE SITREX undertakes to delivery machines free from faults such as to make them unfit to their purpose. The manufacturer declines any responsibility for faults arising from inobservance of the rules contained in the manual and in any case from misuse of the machine.
Need help?
Do you have a question about the MINI-BINDER MF70 and is the answer not in the manual?
Questions and answers