Toa N-8065MS Q-TEE Instruction Manual
Toa N-8065MS Q-TEE Instruction Manual

Toa N-8065MS Q-TEE Instruction Manual

Heavy industrial master station

Advertisement

H
I
EAVY
NDUSTRIAL
Thank you for purchasing TOA's Master Station.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your
equipment.
1. SAFETY PRECAUTIONS
Before installation or use, be sure to carefully read all the instructions in this section for correct and
safe operation.
Be sure to follow all the precautionary instructions in this section, which contain important warnings
and/or cautions regarding safety.
After reading, keep this manual handy for future reference
WARNING
CAUTION
During Installation and Operation
Warning
 Do not expose the unit to water jets or an environment, where it may dip into water or other liquids,
as doing so may result in fire or electric shock.
 Use the unit only with the voltage specified on the unit. Using a voltage higher than the specified one
may result in fire or electric shock.
 Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never place heavy objects -- including the unit itself --
on the power cord, as doing so may result in fire or electric shock.
 Connection, installation and system set-up require an electrically qualified person.
Caution
 Do not stack or staple heavy loads on the unit.
 Keep the unit on a stable and vibration free base. Otherwise the unit could drop down and cause
personal injury or a property damage
 Should the following irregularity be found during use, immediately turn off this system's exchange,
disconnect and uninstall the unit and contact your nearest TOA dealer. Make no further attempt to
operate the unit in this condition as this may cause fire or electric shock.
~If you detect smoke or a strange smell coming from the unit.
~If water or any metallic object gets into the unit ~If the unit falls, or the unit case breaks
~If the power supply cord is damaged (exposure of the core, disconnection, etc.)
~If it is malfunctioning (no tone sounds.)
 To prevent a fire or electric shock, never open nor remove the unit case as there are high voltage
components inside the unit. Refer all servicing such as modification inside the unit to qualified service
personnel.
 Do not touch a plug during thunder and lightning, as this may result in electric shock.
M
S
ASTER
TATION
Indicates a potentially hazardous situation which, if
mishandled, could result in death or serious personal
injury.
Indicates a potentially hazardous situation which, if
mishandled, could result in moderate or minor
personal injury, and/or property damage.
INSTRUCTION MANUAL
N-8065MS Q-TEE
.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the N-8065MS Q-TEE and is the answer not in the manual?

Questions and answers

Summary of Contents for Toa N-8065MS Q-TEE

  • Page 1  Should the following irregularity be found during use, immediately turn off this system's exchange, disconnect and uninstall the unit and contact your nearest TOA dealer. Make no further attempt to operate the unit in this condition as this may cause fire or electric shock.
  • Page 2: Nomenclature And Installation

    2. FEATURES The N-8065MS Q-TEE Industrial Master Station is designed to connect to the IP Intercom Exchange and provide hands-free conversation of high sound quality. Warning! This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
  • Page 3: Mounting Method

    Cable lead-in: 2 x Cable Glands PG9 Insert Cables Ø 3-8 mm To connect the cables from the N-8000EX/8010EX Exchange to the N-8065MS Q-TEE, use the removable terminal plug (2P) supplied with the N-8065MS Q-TEE. The cables have no polarity.
  • Page 4: Relations Between Core Diameter Of Cable And Maximum Cable Length

    The Type of Cables The types of cables are to be determined according to the following conditions. • Twisted pair wires (such as those used for electronic pushbutton telephone) are to be used for wiring between the Exchange and the stations in principle. •...
  • Page 5: Connecting An External Speaker

    [Speaker Connection] Connecting an external speaker Connecting Terminal: Numbered 1-8 Connecting external speaker (8 Ohm) Note  Take care that the directivity of the external speaker is not targeted to the microphone of the N-8065MS Q-TEE to avoid feedback.
  • Page 6 4. DIMENSIONS [Installation Completion Drawing] Side Botton View View View 160 mm 91 mm...
  • Page 7: Specifications

    5. SPECIFICATIONS Power Source 48 V DC (supplied from the IP Intercom exchange) Power Consumption 1.8 W (at rated), 2.4 W (max.) Wiring Method 1 set of twisted pair cable Transmission System 2 wire 160 kbps echo canceller transmission system Signal Level Under 0 dB* Speech Method...
  • Page 8 Traceability Information for Europe (EMC directive 2004/108/EC) Manufacturer: Authorized representative: TOA Electronics Europe GmbH TOA Electronics Europe GmbH Suederstrasse 282, 20537 Hamburg, Suederstrasse 282, 20537 Hamburg, Germany Germany URL: http://www.toa.eu/ 133-TEE011-30...

Table of Contents