Hollyland Solidcom M1 User Manual page 29

Product Installation
2. Connect the 4-wire interface of base station A and base station B using a
network cable. (See Figure 1)
3. Enter the menu interface on base station B and select 4 Wire > Line Sequence
Switching > Cross. (See Figure 3)
4. Connect the POE/LAN interface of base station B and base station C using a
network cable. (See Figure 1)
5. Enter the menu interface on base station C, select M & R > Remote Device, press
the menu/confirmation button, and select the IP address of the corresponding
master device. (See Figure 4)
Figure 3
Figure 4
26