Advertisement
Operation Instructions
1.2 Select Wired Network Setting to turn DHCP on or off. You can also view the
username and password for logging in to the web page.
2. Select Master-Remote Device to set the base station as the master device or
remote device.
2.1 When a single base station is used, the base station needs to be set as the
master device. When two or more base stations are used, one base station
needs to be set as the master device and the other base station as the remote
device.
2.2 For the base station set as the master device, the beltpack numbers will
automatically change to 1–8; for the base station set as the remote device, the
beltpack numbers will automatically change to 9–16.
2.3 This function can only be used when two base stations are cascaded via the
network interface. When a single base station is used, it needs to be set as the
master device.
12
Advertisement
Need help?
Do you have a question about the Solidcom M1 and is the answer not in the manual?