Advertisement
Operation Instructions
Configuring the Base Station on the Web Server
Turn on the base station, connect the base station to a computer using a network
cable via the POE or PWR interface on the base station and the network port on the
computer, configure the same network segment for the computer and base station,
open a browser on the computer, and enter the following addresses (Check the
corresponding addresses through the network menu on the base station):
Master device: 192.168.218.10
Remote device: 192.168.218.11
You can log in to the web server (default password: 12345678 ) to upgrade the base
station, perform beltpack grouping, and set beltpack states.
Configuring the Base Station on the App
1. Download the Solidcom app.
2. Perform connection settings:
Turn on the Wi-Fi function on the base station, find the Wi-Fi network starting with
"HLD" on a mobile phone, and then open the Solidcom app to connect to the Wi-Fi
network. (You can turn on the Wi-Fi function and check the corresponding SSID and
password on the base station.)
20
Advertisement
Need help?
Do you have a question about the Solidcom M1 and is the answer not in the manual?