Programs (P A 1-15); Selection And Adjustment - EWM M3.7X-O Operating Instructions Manual

Functional characteristics
MIG/MAG welding
5.2.8 Programs (P
Dif ferent welding jobs or positions on a workpiece require different welding programs (operating points).
The f ollowing parameters are stored in each program:
• Wire f eed speed and voltage correction (welding power)
• Operating mode, welding type and dynamic
5.2.8.1

Selection and adjustment

The user can change the welding parameters of the main programs with the following components.
32
1-15)
A
Figure 5-13
099-5TLPXQ-EW501
15.12.2022