Spin Speed Selection - Fagor FF-6214 Installation And Operation Manual

4

SPIN SPEED SELECTION

SPIN-DRYING
The wash options must always be selected
after choosing the wash programme. Any
programme change during selection cancels
the previously selected options.
a Spin speed selection and anti-crease
button
A specific spin speed is associated with
the selected programme, and this
appears on the display for display
models. On non-display models, the
corresponding LED will light up.
b You can change it by repeatedly pressing
the spin button. The spin speed will
gradually be reduced at 100 r.p.m.
intervals to 400 r.p.m. for display models.
On non-display models the LED will
light up.
c No spin
Press the spin button again to get to the
no spin option. A programme without a
final spin. It is used to prevent creasing
when washing special fabrics.
d Anti-crease option
The wash programme stops on the last
rinse, with the clothes left in water. When
the function is deactivated, the washing
machine continues the programme,
draining and spin-drying.
It is used, for example, when you are
not at home and want to delay the spin-
drying until you get home, to prevent
the clothes creasing after spin-drying
and being left in the drum to be removed.
using the appliance and practical tips
a
b
c
d
82
1100
3h 6h
700
400
1100
3h 6
700
400
1100
3h 6
700
400
Select