Test Precautions; Ambient Conditions; Warranty - ANDILOG CENTOR WIRELESS II Instruction Manual

1.2.3. Test precautions

Most of the tests carried out with instruments from the Andilog Technologies range are destructive
tests. The hazards associated with this type of testing require our instruments to be used by
experienced and trained operators. Due to the nature and use of the equipment sold by Andilog, the
purchaser's acceptance of Andilog Technologies' products constitutes acceptance of the risks and
damages that may result from the use of Andilog's instruments.

1.2.4. Ambient conditions

•
Operating temperature: 0 to 35° C
•
Storage temperature: -20 to 45° C
•
Relative humidity: 5% to 95%, non-condensing
•
Maximum operating altitude: 3,000 m

1.2.5. Warranty

Subject to the conditions below, Andilog Technologies warrants to the purchaser that it will repair or
replace at no charge new instruments sold subject to normal use and maintenance. This warranty
applies if the purchaser detects a defect in workmanship or materials within a period of two (2) years
from the date of shipment.
The conditions of application are:
•
ANDILOG was notified in writing of the defect before the end of the warranty period.
•
Products are shipped to Andilog Technologies with prior agreement
from Andilog Technologies.
•
All transport costs are paid by the buyer.
•
The products have been used and maintained under normal
conditions of use.
Any repair or replacement carried out by the seller without the agreement
of Andilog Technologies voids the warranty.
In no event will Andilog be liable for any damages, business interruption or
production stoppage arising from the purchase, use or non-operation of our
products. Even if Andilog has been informed of the possibility of such
damage.
The accuracy of our devices is guaranteed at the time of shipment at the value indicated in our
documentation or offers.
If products are damaged during shipment, notify the carrier and Andilog Technologies immediately.
The warranty is void in the event of accident, misuse, or abuse.
The warranty does not cover calibration, overloaded sensors, or consumable parts such as batteries,
unless the damage is due to a material or manufacturing defect.
- 5 -
Instruction manual – 2.04
CENTOR WIRELESS II