Test Stand; Test Precautions; Ambient Conditions; Warranty - ANDILOG CENTOR EASY II Instruction Manual

1.2.3. Test stand

The force gauge or torque gauge can be fixed to a frame using M5 or 10-32 screws. The length of the
screws used must not exceed 3mm inside the instrument. Contact Andilog if you need further

1.2.4. Test precautions

information or if you require an adapter to mount the instrument on a frame.
Most of the tests carried out with instruments from the Andilog Technologies range are destructive
tests. The hazards associated with this type of testing require our instruments to be used by
experienced and trained operators. Due to the nature and use of the equipment sold by Andilog, the
purchaser's acceptance of Andilog Technologies' products constitutes acceptance of the risks and

1.2.5. Ambient conditions

damages that may result from the use of Andilog's instruments.
Operating temperature: 0 to 35° C
•
Storage temperature: -20 to 45° C
•
Relative humidity: 5% to 95%, non-condensing
•

1.2.6. Warranty

• Maximum operating altitude: 3,000 m
Subject to the conditions below, Andilog Technologies warrants to the purchaser that it will repair or
replace at no charge new instruments sold subject to normal use and maintenance. This warranty
applies if the purchaser detects a defect in workmanship or materials within
a period of two (2) years from the date of shipment.
The conditions of application are:
• ANDILOG was notified in writing of the defect before the end of the
warranty period.
Products are shipped to Andilog Technologies with prior agreement
•
from Andilog Technologies.
All transport costs are paid by the buyer.
•
The products have been used and maintained under normal
•
conditions of use.
Any repair or replacement carried out by the seller without the agreement of Andilog Technologies
voids the warranty.
In no event will Andilog be liable for any damages, business interruption or production stoppage arising
from the purchase, use or non-operation of our products. Even if Andilog has been informed of the
possibility of such damage.
The accuracy of our devices is guaranteed at the time of shipment at the value indicated in our
documentation or offers.
- 5 -
Instruction manual
CENTOR EASY II