Go Zero - ANDILOG CENTOR WIRELESS II Instruction Manual

Example for force measurement:
Indicates direction
measurement (tension
compression). Force measured
instantaneously
Maximum pull from tare
Maximum compression from
tare
Example for torque measurement:
Indicates direction
measurement (clockwise or
counterclockwise).
measured instantaneously
Maximum clockwise
Maximum counter-clockwise
The display order can be changed by pressing the

3.3.1. Go Zero

During tests, it is often necessary to reset the display to zero (e.g. to tare an accessory). Press the
green 0 key. The display shows 0.
of
or
of
Torque
- 12 -
Instruction manual – 2.04
CENTOR WIRELESS II