Data Menu; Display Menu - ANDILOG CENTOR WIRELESS II Instruction Manual

3.4.1. DATA menu

To change the type of value to be saved, move to the "Peak" line, then press the right arrow. A message
appears, asking if you wish to delete all values in memory. Warning: changing the type of value to be
saved systematically deletes all values in memory.
If you wish to clear the memory without changing direction, press and hold the button

3.4.2. DISPLAY menu

Line 1, 2, 3: You can choose what is displayed on each line of the measurement screen. The possibilities
are current value, max in each measurement direction and No if you don't want to display this line.
Line 1 cannot be disabled.
Bargraph: whether or not to display the Bargraph.
Auto-off: time during which the Centor Wireless II remains switched on without pressing a key.
Adjustable from 1 to 15 minutes. Can be disabled with No.
The Centor Wireless II can store the peak in memory.
It can store up to 500 values. Each value is stored in
the following format:
Measurement # Value Date Time
The saved value is indicated by the blue arrow at the
top of the screen:
•
Upwards, maximum traction
•
Downward, maximum compression
•
To the right, clockwise
•
To the left, counterclockwise
You can customize the Centor Wireless II display to
show only the information you need.
The information you can customize is as follows: units
displayed, value displayed on each line, Bargraph
display, time to auto power off, invert display.
Unit: changes the unit used for measurements. This
setting can also be changed directly by pressing the U
key on the keypad while in the measurement screen.
- 15 -
Instruction manual – 2.04
CENTOR WIRELESS II
.