Go Zero - ANDILOG CENTOR EASY II Instruction Manual

Indicates direction
measurement (tension
compression). Force measured
instantaneously
Maximum pull from tare
Maximum compression from
tare
Example for force measurement :
Indicates direction
measurement (clockwise or
counterclockwise).
measured instantaneously
Maximum clockwise
Maximum counter-clockwise

3.3.1. Go Zero

The display order can be changed by pressing the
During tests, it is often necessary to reset the display to zero (e.g. to tare an accessory). Press the
green 0 key. The display shows 0.
of
or
of
Torque
- 14 -
Instruction manual
CENTOR EASY II