Subscribe to Our Youtube Channel
Related Manuals for Creative Play OCTAVIA HALF 4M HS111
Summary of Contents for Creative Play OCTAVIA HALF 4M HS111
- Page 1 HS111 - OCTAVIA HALF (4M) Installation Instructions REF: HS111 pg 1 of 17 30.07.2019...
-
Page 2: Parts Required
PARTS REQUIRED SIDE ASSEMBLIES - QTY x 4 SEAT SLATS - INNER (SET) x 2 SS-I SEAT SLATS -END (SET) x 2 SS-E SEAT SUPPORT ASSEMBLY x 3 SSA-I (INNER) SEAT SUPPORT ASSEMBLY x 2 SSA-E (END) SEATING & SIDES PARTS / ASSEMBLIES UPRIGHT MAIN TIMBER UMT - QTY x5 UPRIGHT ADDITIONAL... - Page 3 PARTS REQUIRED FLOOR - DECKING QTY x 16 FLOOR ASSEMBLY QTY x 2 - FA FLOOR SURROUND ASSEMBLY QTY x 2 - FSA - a QTY x 2 - FSA - b QTY x 2 - FSA - c QTY x 1 - FSA - d FLOOR SUPPORTS QTY x 2 - FS FLOOR PARTS / ASSEMBLIES...
- Page 4 PARTS REQUIRED ROOF TRIM / KING ‘POST’ QTY x 1 - RT1 - ROOF CAP QTY x 1 - RT2 - KING POST QTY x 3 - RT3a - 6x1 TRIM QTY x 2 - RT3b - 6 x 1 TRIM QTY x 2 - RT4 QTY x 1 - RT5 ROOF ASSEMBLIES...
-
Page 5: Foundation Details
FOUNDATION DETAILS NOTES: POST HOLES 400MM x 400MM REF: HS111 pg 5 of 17 30.07.2019... -
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS POSITION FSA ASSEMBLIES POSITION THESE ON THE GROUND 120MM FACE ON THE OUTSIDE FSA - b FSA - b FSA - al FSA - cl FSA - ar FSA - cr ATTACH FSA - d TIMBER TO REINFORCE FSA TIMBERS SHOWN USING 4X M8X180MM WOOD SCREWS, ENSURE SCREWS ARE INSERTED FROM INSIDE FRAMEWORK FSA - d REF: HS111... - Page 7 INSTALLATION INSTRUCTIONS INSTALL THE UMT TIMBERS THE 90X90 TIMBER ON THE FSA ASSEMBLIES HELP POSITION THESE SCREW THE FAS ASSMBLIES TO THE UMT TIMBERS USING - 97.M8X120CSK - QUANTITY X 20 REF: HS111 pg 7 of 17 30.07.2019...
- Page 8 INSTALLATION INSTRUCTIONS INSTALL ONE UAT TIMBERS IN CENTRE OF FSA - d TIMBER USING 2X M8X180MM WOOD SCREWS NOTES: TOP FACE OF TIMBER WILL BE FLUSH WITH THE TOP OF THE ‘INNER’ 90X90 TIMBER FSA - d INSTALL FA - a ASSEMBLIES USING - 97.M8X180CSK - QUANTITY X 16 REF: HS111 pg 8 of 17...
- Page 9 INSTALLATION INSTRUCTIONS ATTACH ADDITIONAL SUPPORTS USING 2 X M8X180MM PER TIMBER - SCREWING INTO THE FA ASSEMBLY INSTALL FLOOR SUPPORTS - FS USING M8X180MM WOOD SCREWS REF: HS111 pg 9 of 17 30.07.2019...
- Page 10 INSTALLATION INSTRUCTIONS ATTACH THE RS ROOF TIMBERS USING 2 X M8X80MM WOOD SCREW EITHER END, ENSURE TIMBERS ARE POSITIONED AS SHOWN NOTES: ENSURE TIMBERS ARE PRE-DRILLED AND COUNTERSUNK TIMBERS ARE POSITIONED LEVEL WITH THE TOP OF THE UPRIGHT TIMBER ATTACH RM TIMBERS TO KING POST (RT2) AND SCREW TO UPRIGHTS USING 2 X M8X120MM &...
- Page 11 INSTALLATION INSTRUCTIONS REPEAT FOR THE REMAINING RM TIMBERS USING 120MM SCREWS INTO THE KING POST AND 180 SCREWS INTO THE UPRIGHT TIMBERS SCREW RA - ROOF ASSEMBLIES TO RM TIMBERS USING 6 X M8X80MM WOOD SCREWS PER SIDE, ENSURE ROOF IS POSITIONED AS SHOWN REF: HS111 pg 11 of 17 30.07.2019...
- Page 12 INSTALLATION INSTRUCTIONS REPEAT FOR THE REMAINING RA - ROOF ASSEMBLIES SCREW TRIM TIMBERS TO THE MAIN ROOF SUPPORTS (RM TIMBERS) USING 4 X M8X80MM WOOD SCREWS FOR EACH SECTION FIG 1 FIG 2 NOTES: RTA / B TIMBERS ARE TO BE POSITIONED ALTERNATELY TO ENSURE THE TIMBERS DO NOT CLASH - SEE ABOVE FIG 1 ENSURE OVERHANG IS AS SHOWN ABOVE - FIG 2...
- Page 13 INSTALLATION INSTRUCTIONS ATTACH THE RT4 & RT5 FRONT TRIM TIMBERS USING 12 X M8X80MM, SCREW TO RM TIMBERS RT3 - a NOTES: ENSURE RT5 TIMBER IS PLACED OVER RT4 TIMBER AND SCREWED TOGETHER AS SHOWN TOP OF RT5 TRIM SHOULD BE FLUSH WITH TOP OF TR3 TRIM SLATS ALREADY INSTALLED ATTACH THE RT1 TRIM PIECE...
- Page 14 ATTACH ROOF BRACES - RB USING - 97.M8X120CSK - QUANTITY X 4 PER TIMBER INSTALL DECKING AS SHOWN BELOW 97.D4.5X60 (DECK SCREW) - APPROX 2MM BETWEEN EACH SLAT USING - NOTES: WORK FROM FRONT TO BACK - SPACING APPROX 2MM BETWEEN TIMBERS ENSURE EACH PIECE IS SCREWED TO ALL SUPPORTS (DOTTED LINE) REF: HS111...
- Page 15 INSTALLATION INSTRUCTIONS NOTES: USE 2 X DECK SCREWS FOR WHERE DECK IS SCREWED INTO FLOOR SUPPORTS - GENERALLY 20 X DECK SCREWS PER SLAT / TIMBER ATTACH SIDE ASSEMBLIES USING M8X80MM WOOD SCREWS, ENSURE TIMBERS ARE PRE-DRILLED AND COUTNERSUNK 4 SCREWS PER SIDE AS SHOWN REF: HS111 pg 15 of 17 30.07.2019...
- Page 16 INSTALLATION INSTRUCTIONS INSTALL SEAT SUPPORTS ENSURE ENTRANCE HAS AN SSA-(END) EITHER SIDE FIG 3 FIG 4 NOTES: SSA - I SSA - I SSA - I USE 2 X M8X120MM WOOD SCREWS TO SCREW INTO THE UPRIGHT TIMBER - FIG 3 FURTHER SECURE USING 2 X M8X120MM WOOD SCREWS, POSITION THESE SCREWS ON THE ‘INSIDE’...
-
Page 17: Installation Complete
INSTALLATION INSTRUCTIONS INSTALLATION COMPLETE PLEASE CHECK ALL SCREWS COUNTERSUNK / NEAT SAND ANY TIMBERS AS REQUIRED REF: HS111 pg 17 of 17 30.07.2019...
Need help?
Do you have a question about the OCTAVIA HALF 4M HS111 and is the answer not in the manual?
Questions and answers