Setting Up - Aiwa HV-MX1 Operating Instructions Manual

30
1
MENU
%
2
Q
MENU
%
MENU
@o
7!3
I
Mm"
i
1 PROGRAM TIMER
I j fifig[A:~T
— F WET UP MENU
IN
TUNER PRESET
r
Ef UP MENU
~%&;$~WSECAM.NTSC
ON .OFF
3
Q:*,-<..,
MENU
c... --,,,,
1
~
COkOR SYSTEM [
/
w#lTO.PAL.MESECAM. NTSC
~ B9BK COLORj
cON .OFF
SET ITEM : Q OR ES
SET DATA : OR
EXIT : MENU
4
SETTING UP
Under the SET UP MENU, setup the unit for different operating modes.
Adjust the settings to fit your particular case. Do this procedure on the
remote control.
1
2
3
4
Press the MENU button.
The main MENU screen appears.
Select'"4 SET UP MENU" from the MENU screen.
Press the V (3 times) and > buttons.
The SET UP MENU screen appears.
Adjust the settings.
Select the item to change with the V or A button. The selected item
flashes. (Each item is explained below.)
Set the data with the > or< button.
When finished, press the MENU button.
SET UP MENU ITEMS
COLOR SYSTEM @
The COLOR SYSTEM position selects the "AUTO, "PAL", "ME SE CAM",
"NTSC color system for the input source.
AUTO: Select to have the unit change among the PAL, MESECAM and
NTSC color system automatically. Select the "AUTO for the usual
use.
PAUMESECAM/NTSC: If the unit does not correctly select the proper
color system, resulting in abnormal coloration, manually set to the
PAL, MESECAM or NTSC color system.
BACK COLOR @
When the BACK COLOR position is "ON", a blue back screen color
appears during playback of unrecorded portions of a tape, or during
periods of no TV signal reception.
When the position is '(OFF, even during periods of no TV signal
reception, no blue screen appears.