Aiwa HV-MX1 Operating Instructions Manual page 62

62
BASIC RECORDING
————
To record one channel while watching another
After starting the recording (step 5 on page 60), press the TV/VCR button
to select the TV mode. The TV broadcast being recorded disappears.
Select the desired channel to watch with the channel control on the TV,
To monitor the recording, press the TV/VCR button to select the \/CR
mode, then select the video channel (channel 3 or 4) on the TV,
Selecting the recording speed
Recording in either the SP, EP, or LP mode is possible with this Iunit,
depending upon the color system. When recording, select the desired
recording mode with the TAPE SPEED button.
PAUMESECAM: SP, LP
NTSC: SP, EP
A cassette recorded in the EP mode runs three times as slowly, and a
cassette recorded in the LP mode runs twice as slowly, asatape recorded
in the SP mode.
To prevent an accidental recording ~
To prevent accidentally recording over a tape, break off the tab on the
back edge of the tape. To record over the tape again, cover the tab Ihole
with adhesive tape @.
If a recording is attempted while a cassette without an erasure prevention
tab is inserted, the cassette is ejected.