Aiwa HV-MX1 Operating Instructions Manual page 14

NAMES AND FUNCTIONS OF CONTROLS
14
REAR PANEL
o
AC inlet
Connect the supplied power cord.
@AuD10 INPUT jack
Connect to the audio output of a VCR or other external equipment.
@VIDEO INPUT jack
Connect to the video output of a VCR or other external equipment.
@CHANNEL selector
(3cH/4CH)
Select the channel on which the signal from this unit is transmitted to
the TV.
@RF OUT
connector
Connect to the antenna input of a TV.
@AUDIO OUTPUT jack
Connect to the audio input of a TV or audio equipment.
@ VIDEO OUTPUT jack
Connect to the video input of a TV.
@AERIAL
connector
Connect to an external antenna.
DISPLAY WINDOW
@)
T ape operation indicators
Shows the direction of the current tape operation.
@
Counter memory indicator (MEMO)
Lights when the counter memory function is activated.
@
Tape speed indicators (SP/LP/EP)
Shows the current tape speed.
@Automatic
tracking indicator (A-TR)
Lights when the automatic tracking mode is activated. Flashes when
the tracking is being adjusted automatically.
@LINE
recording indicator
Lights when input signals are selected from AUDIO INPUT and
VIDEO INPUT jacks.
@AUTO
color system indicator
Lights when the COLOR SYSTEM on the SETUP MENU screen is set
to AUTO.
@VCR
mode indicator
Lights when the unit is in the VCR mode.
@
CATV indicator
Lights when the BAND is setto CATV ontheTUNER PRESET screen.
@l INPUT system indicators (NTSC/PAUSECAM)
Shows the color system of the input signal from the antenna or
external equipment.
@ PB/REC system indicators (NTSC/PAUMESECAM)
Shows the color system of the tape which is recording or playing back.
@ OUTPUT system indicators (NTSC/PAIJSECAM)
Shows the color system of the output signal to the TV.
@TIMER recording indicator
Lights when the timer function is activated.
@
Cassette-in indicator
Lights when a cassette is loaded.
@
Quick timer recording indicator (QTR)
Lights during a quick timer recording.
@
Clock/tape counter display
Shows the current time or tape counter
@
INDEX search indicator
Lights during an index search operation. Blinks while an index signals
is being marked or erased.
@TV
channel number display
Shows the currently selected channel.