Volvo CHARGING CABLE MODE 2 TYPE 2 CONNECTOR User Manual page 9

Fault and Troubleshooting Indicators
Indicator Status Definition
Indicator is still 1.
off after plug in
2. Replug and power the charging cable again or try another AC
3. If the problem persists, contact Customer Support.
Indicator is 1.
blinking red
2. Unplug the vehicle connector.
3. If the situation persists, contact Customer Support.
Indicator is in 1.
solid red
2. Unplug the vehicle connector.
3. Wait the charging cable recover from temporary error.
4. Plug in the vehicle connector.
5. If the situation persists, contact Customer Support.
Indicator is in 1.
solid white and
charging cable
2. If the white indicators still do not blink after 10 seconds,
cannot process
to charging
session
3. If the situation persists, contact Customer Support.
Make sure the AC input plug is well-connected.
socket-outlet.
There is a critical error (hardware fault).
There is a temporary error.
Unplug the vehicle connector, then plug in the vehicle
connector to vehicle inlet again.
disconnect the vehicle connector and AC input plug firstly,
then plug in the vehicle connector and AC input plug again.
CHARGING CABLE – MODE 2, TYPE 2 CONNECTOR
en-GB
9