Bridge Protocol Data Units - D-Link DES-3326S User Manual

DES-3326S Layer 3 Fast Ethernet Switch User's Guide
Port Cost
Table 5-5. STP Parameters – Port Group Level

Bridge Protocol Data Units

For STP to arrive at a stable network topology, the following
information is used:
•
The unique switch identifier
•
The path cost to the root associated with each switch
port
•
The port identifier
STP communicates between switches on the network using
Bridge Protocol Data Units (BPDUs). Each BPDU contains the
following information:
•
The unique identifier of the switch that the transmitting
switch currently believes is the root switch
•
The path cost to the root from the transmitting port
•
The port identifier of the transmitting port
The switch sends BPDUs to communicate and construct the
spanning-tree topology. All switches connected to the LAN on
Switch Management and Operating Concepts
chance of a given port being
elected as the root port
A value used by
evaluate paths
calculates path
selects the path with the
minimum cost as the active
path.
STP to 19 – 100Mbps
– STP Fast Ethernet
costs and ports
10
1000Mbps
Gigabit
Ethernet
ports
–
61