D-Link DES-3326S User Manual page 221

DES-3326S Layer 3 Fast Ethernet Switch User's Guide
To edit a RIP configuration, click the corresponding
Interface Name click-box and then click the Edit button:
The following fields can be set:
Parameter
Interface Name
TX Mode
<Disabled>
RX Mode
Web-Based Switch Management
Figure 6-34. Setup RIP – Edit
Description
The name of the IP interface on
which RIP is to be setup. This
interface
configured on the Switch.
Toggle among Disabled, V1 Only, V1
Compatible, and V2 Only. This entry
specifies which version of the RIP
protocol will be used to transmit RIP
packets.
transmission of RIP packets.
Toggle among Disabled, V1 Only, V2
must be
Disabled prevents
previously
the
221