D-Link DES-3326S User Manual page 225

DES-3326S Layer 3 Fast Ethernet Switch User's Guide
Current Route ID
AS Border Router
State
OSPF Area Setting
This menu allows the configuration of OSPF Area IDs and to
designate these areas as either Normal or Stub. Normal OSPF
areas allow Link-State Database (LSDB) advertisements of
routes to networks that are external to the area, Stub areas do
not allow the LSDB advertisement of external routes.
areas use a default summary external route (0.0.0.0 or Area 0)
to reach external destination.
Web-Based Switch Management
this case,
10.255.255.255, but any unique 32-
bit number will do.
entered, the
assigned to the switch will become
the OSPF Route ID.
Displays the
currently in use by the switch. This
Route ID is
convenience to
changing the switch's OSPF Route
ID.
Autonomous System Border Router −
determines whether or not the switch
is configured
Router.
Allows OSPF
disabled globally
without changing
configuration.
it would
If 0.0.0.0 is
highest IP address
OSPF Route
displayed
the user
as an AS Border
to be enabled
on the switch
the
be
ID
as a
when
or
OSPF
Stub
225