Subscribe to Our Youtube Channel
Related Manuals for Dormakaba TS9356 PKT 90/119
Summary of Contents for Dormakaba TS9356 PKT 90/119
- Page 1 TS9356 PKT 90/119 Surface Applied Closer Pocket door track mount in 90°/119° pocket (Closer on wall) Installation instructions 08280091 – 08-2019 | EN |...
-
Page 2: Table Of Contents
TS9356 PKT 90-119 Installation Instructions Table of Contents Table of contents 1 Technical specifications Overview Size selection chart Tools recommended Surface closer system Handing the door Installation instructions Installing the back plate Installing the surface closer Installing track assembly... -
Page 3: Technical Specifications
TS9356 PKT 90-119 Installation Instructions Technical specifications 1 Technical specifications Overview Caution: sex nuts are required for attachment of Requires DORMA EM504 electromagnetic door components to unreinforced doors and to wood holder or plastic faced composite type fire doors, unless Use closer body style “B”... -
Page 4: Surface Closer System
TS9356 PKT 90-119 Installation Instructions Surface closer system Handing the door 1.4 Surface closer system Fig.1 The surface closer is comprised of the following components. Closer body Closing/sweep speed adjustment Main arm Latch speed adjustment Track assembly Backcheck adjustment... -
Page 5: Installation Instructions
TS9356 PKT 90-119 Installation Instructions Installing back plate Installing surface closer Installing track assembly Installation instructions 2.1 Installing the back plate Fig.3 Reference template 08280092 2.1.1 Attach the back plate to the installing surface using the four screws [10-32 machine screws or #10 wood screws] provided with the surface closer. -
Page 6: Installing Main Arm
TS9356 PKT 90-119 Installation Instructions Main arm 2.4 Installing main arm Fig.6 Right hand door 2.4.2 Secure with one M8x15mm shoulder bolt (2) 2.4.1 Align the arm (1) with the slide shoe of the track using an M5 hex key. -
Page 7: Adjustments
TS9356 PKT 90-119 Installation Instructions Adjust closing speeds Adjustments Maximum opening angle is 119º. Set closer spring size prior to making any closing speed adjustments. Door should close in 3 to 6 seconds from 90º. Do not back valves out beyond closer casting. -
Page 8: Adjust Spring Force
TS9356 PKT 90-119 Installation Instructions Adjust spring force Secure covers 3.2 Adjust spring force Fig.9 Door width Full turns of Closer size Increase spring adjust Decrease TS9356 4’ 4’-6” TS9356 NOTE: Supplied with a size 6 spring setting. Increase force: turn clockwise 6 times (max) Install covers Fig.10... - Page 9 DORMA USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the TS9356 PKT 90/119 and is the answer not in the manual?
Questions and answers