Dormakaba TS93 Series Installation Instructions Manual
Surface applied closer, push side mount spring track
Hide thumbs
Also See for TS93 Series:
- Installation instructions manual (12 pages) ,
- Installation instructions manual (9 pages)
Related Manuals for Dormakaba TS93 Series
Summary of Contents for Dormakaba TS93 Series
- Page 1 TS93 SPT Surface Applied Closer Push side mount spring track (SPT) Installation instructions 08280191 – 08-2019 | EN |...
-
Page 2: Table Of Contents
TS93 SPT Installation Instructions Table of Contents Table of contents 1 Technical specifications Overview Size selection chart Tools recommended Surface closer system Handing the door Installation instructions Installing the back plate and angle bracket Installing the surface closer Installing main arm... -
Page 3: Technical Specifications
TS93 SPT Installation Instructions Technical specifications 1 Technical specifications Overview Caution: sex nuts are required for attachment of Arrows on closer mounting plate point upward. components to unreinforced doors and to wood or plastic faced composite type fire doors, unless... -
Page 4: Surface Closer System
TS93 SPT Installation Instructions Surface closer system Handing the door 1.4 Surface closer system Fig.1 The surface closer is comprised of the following components. Closer body: "G" body Cover and end caps Main arm Closing/sweep adjustment Track assembly Latch speed adjustment... -
Page 5: Installation Instructions
TS93 SPT Installation Instructions Installing back plate and angle bracket Installing surface closer Installing main arm Installation instructions 2.1 Installing the back plate and angle bracket Fig.3 NOTE: Make sure arrows on plate point upward. Reference template 08280192 2.1.1 Attach the back plate (1) to the mounting... -
Page 6: Installing Track Assembly
TS93 SPT Installation Instructions Installing track assembly Secure main arm 2.4 Installing track assembly Fig.6 Left hand door Right hand door Closer is omitted in image for better viewing of the track assembly. Left hand door NOTE: Spring tracks are pre-assembled. -
Page 7: Adjustments
TS93 SPT Installation Instructions Adjust closing speeds Adjustments Confirm closer spring size prior to making any Maximum opening angle is 110º. closing speed adjustments. Door should close in 3 to 6 seconds from 90º. Do not back valve heads out beyond closer casting. -
Page 8: Adjust Spring Force
TS93 SPT Installation Instructions Adjust spring force Secure covers 3.2 Adjust spring force Fig.9 TS9315 Increase NOTE: Supplied with a size 2 spring setting. Barrier free openings: Take an opening force reading Decrease from the pull on the door. If required, adjust the spring force to meet the barrier-free requirement. - Page 9 DORMA USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the TS93 Series and is the answer not in the manual?
Questions and answers