Page 1
TS93 T/TH Surface Applied Closer Pull side jamb mount with dead stop (T) Optional hold open(TH) Installation instructions 08279221 – 08-2019 | EN |...
TS93 T/TH Installation Instructions Table of Contents Table of contents 1 Technical specifications Overview Size selection chart Tools recommended Surface closer system Handing the door Installation instructions Installing the back plate Installing the surface closer Installing main arm Installing track assembly...
TS93 T/TH Installation Instructions Technical specifications 1 Technical specifications Overview Caution: sex nuts are required for attachment of Arrows on mounting plate point upward. components to unreinforced doors and to wood Follow included template to properly prepare or plastic faced composite type fire doors, unless...
TS93 T/TH Installation Instructions Surface closer system Handing the door 1.4 Surface closer system Fig.1 The surface closer is comprised of the following components. Closer body: “B” body Closer cover Main arm Closer end covers Track assembly Track cover Pinion 1.5 Handing the door...
TS93 T/TH Installation Instructions Installing back plate Installing surface closer Installing main arm Installation instructions 2.1 Installing the back plate Fig.3 Right hand door NOTE: For use on top jamb applications on the pull side Backplate of the door.
TS93 T/TH Installation Instructions Installing track assembly Secure main arm 2.4 Installing track assembly Fig.6 HINGE Left hand door - No hold open Dead stop Cushion Hold open Hold open Track Slide Cushion adjustable protector slide shoe mechanism channel...
TS93 T/TH Installation Instructions Adjust closing speeds Adjust hold open Adjustments Confirm closer spring size prior to making any Maximum opening angle is 175º. closing speed adjustments. Door should close in 3 to 6 seconds from 90º. Do not back valve heads out beyond closer casting.
TS93 T/TH Installation Instructions Adjust spring force Secure covers 3.3 Adjust spring force Fig.10 TS9315 Increase NOTE: Supplied with a size 2 spring setting. Barrier free openings: Take an opening force reading Decrease from the pull on the door. If required, adjust the spring force to meet the barrier-free requirement.
Page 9
DORMA USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the TS93 Series and is the answer not in the manual?
Questions and answers