Subscribe to Our Youtube Channel
Related Manuals for Dormakaba TS93 ST
Summary of Contents for Dormakaba TS93 ST
- Page 1 TS93 ST Surface Applied Closer Pull side jamb mount spring spring (ST) Installation instructions 08280181 – 08-2019 | EN |...
- Page 2 TS93 ST Installation Instructions Table of Contents Table of contents 1 Technical specifications Overview Size selection chart Tools recommended Surface closer system Handing the door Installation instructions Installing the back plate Installing the surface closer Installing main arm Installing track assembly...
- Page 3 TS93 ST Installation Instructions Technical specifications 1 Technical specifications Overview Caution: sex nuts are required for attachment of Arrows on mounting plate point upward. components to unreinforced doors and to wood Follow included template to properly prepare or plastic faced composite type fire doors, unless...
- Page 4 TS93 ST Installation Instructions Surface closer system Handing the door 1.4 Surface closer system Fig.1 The surface closer is comprised of the following components. Pinion Closer body: “B” body Closer cover Main arm Closer end covers Track assembly 1.5 Handing the door Fig.2...
- Page 5 TS93 ST Installation Instructions Installing back plate Installing surface closer Installing main arm Installation instructions 2.1 Installing the back plate Fig.3 Right hand door Reference template 08280182 Backplate NOTE: For use on top jamb applications on the pull side of the door.
- Page 6 TS93 ST Installation Instructions Installing track assembly Secure main arm 2.4 Installing track assembly Fig.6 Spring Shock Slide shoe Track channel block block block 1/4-20x2" Closer is omitted from image for better viewing of the track assembly. Right hand door •...
- Page 7 TS93 ST Installation Instructions Adjust closing speeds Spring force Adjustments Maximum opening angle is 175º. Confirm closer spring size prior to making any closing speed adjustments. Door should close in 3 to 6 seconds from 90º. Do not back valve heads out beyond closer casting.
- Page 8 TS93 ST Installation Instructions Secure covers Install covers Fig.10 Closer cover 4-40 pan head screw End covers 4.1.1 Snap both end covers into place. 4.1.3 Secure with one 4-40 Phillips pan head 4.1.2 Remove un-needed tab and snap cover over screw.
- Page 9 DORMA USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the TS93 ST and is the answer not in the manual?
Questions and answers