Related Manuals for Dormakaba TS9356 PKT 120/170
Summary of Contents for Dormakaba TS9356 PKT 120/170
- Page 1 TS9356 PKT 120/170 Surface Applied Closer Pocket door track mount in 120°/170° pocket (Closer on wall) Installation instructions 08279971 – 08-2019 | EN |...
-
Page 2: Table Of Contents
TS9356 PKT 120/170 (Closer on door) Table of Contents Installation Instructions Table of contents 1 Technical specifications Overview Size selection chart Tools recommended Surface closer system Handing the door Installation instructions Installing the back plate Installing the surface closer... -
Page 3: Technical Specifications
TS9356 PKT 120/170 (Closer on door) Technical specifications Installation Instructions 1 Technical specifications Overview Caution: sex nuts are required for attachment of Requires DORMA EM504 electromagnetic door components to unreinforced doors and to wood holder or plastic faced composite type fire doors, unless Use closer body style “B”... -
Page 4: Surface Closer System
TS9356 PKT 120/170 (Closer on door) Surface closer system Installation Instructions Handing the door 1.4 Surface closer system Fig.1 The surface closer is comprised of the following components. 6. Closing/sweep speed adjustment 1. Closer body 7. Latch speed adjustment 2. -
Page 5: Installation Instructions
TS9356 PKT 120/170 (Closer on door) Installing back plate Installation Instructions Installing surface closer Installing track assembly Installation instructions 2.1 Installing the back plate Fig.3 Reference template 08279972 2.1.1 Attach the back plate to the installing surface using the four screws [10-32 machine screws or #10 wood screws] provided with the surface closer. -
Page 6: Installing Main Arm
TS9356 PKT 120/170 (Closer on door) Main arm Installation Instructions 2.4 Installing main arm Fig.6 Right hand door 2.4.2 Secure with one M8x15mm shoulder bolt (2) 2.4.1 Align the arm (1) with the slide shoe of the track using an M5 hex key. -
Page 7: Adjustments
TS9356 PKT 120/170 (Closer on door) Adjust closing speeds Installation Instructions Adjustments Maximum opening angle is 170º. Set closer spring size prior to making any closing speed adjustments. Door should close in 3 to 6 seconds from 90º. Do not back valves out beyond closer casting. -
Page 8: Adjust Spring Force
TS9356 PKT 120/170 (Closer on door) Adjust spring force Installation Instructions Secure covers 3.2 Adjust spring force Fig.9 Door width Full turns of Closer size Increase spring adjust Decrease TS9356 4’ 4’-6” TS9356 NOTE: Supplied with a size 6 spring setting. - Page 9 DORMA USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the TS9356 PKT 120/170 and is the answer not in the manual?
Questions and answers