Related Manuals for Dormakaba TS9356 PKT 180
Summary of Contents for Dormakaba TS9356 PKT 180
- Page 1 TS9356 PKT 180 Surface Applied Closer Pocket door track mount in 180° pocket Installation instructions 08279981 – 08-2019 | EN |...
-
Page 2: Table Of Contents
TS9356 PKT 180 Installation Instructions Table of Contents Table of contents 1 Technical specifications Overview Size selection chart Surface closer system Handing the door Tools recommended Installation instructions Installing the back plate Installing the surface closer Installing track assembly... -
Page 3: Technical Specifications
TS9356 PKT 180 Installation Instructions Technical specifications 1 Technical specifications Overview Caution: sex nuts are required for attachment of Requires DORMA EM504 electromagnetic door components to unreinforced doors and to wood holder or plastic faced composite type fire doors, unless Use closer body style “B”... -
Page 4: Handing The Door
TS9356 PKT 180 Installation Instructions Surface closer system Handing the door 1.4 Handing the door Fig.1 The surface closer is comprised of the following components. Closing/sweep speed adjustment Closer body Latch speed adjustment Main arm Backcheck adjustment Track assembly... -
Page 5: Installation Instructions
TS9356 PKT 180 Installation Instructions Installing back plate Installing surface closer Installing track assembly Installation instructions 2.1 Installing the back plate Fig.3 NOTE: Make sure arrows on plate point upward. Reference template 08279982 2.1.1 Attach the back plate to the installing surface... -
Page 6: Installing Main Arm
TS9356 PKT 180 Installation Instructions Main arm 2.4 Installing main arm Fig.6 Right hand door 2.4.2 Secure with one M8x15mm shoulder bolt 2.4.1 Align the arm (1) with the slide shoe of the (2) using an M5 hex key. -
Page 7: Adjustments
TS9356 PKT 180 Installation Instructions Adjust closing speeds Adjustments Maximum opening angle is 180º. Set closer spring size prior to making any closing speed adjustments. Door should close in 3 to 6 seconds from 90º. Do not back valves out beyond closer casting. -
Page 8: Adjust Spring Force
TS9356 PKT 180 Installation Instructions Adjust spring force Secure covers 3.2 Adjust spring force Fig.9 Door width Full turns of Closer size Increase spring adjust Decrease TS9356 4’ 4’-6” TS9356 NOTE: Supplied with a size 6 spring setting. Increase force: turn clockwise 6 times (max) Install covers Fig.10... - Page 9 DORMA USA, Inc. 1 Dorma Drive, Drawer AC Reamstown, PA 17567 T: 717-336-3881 F: 717-336-2106 www.dormakaba.com...
Need help?
Do you have a question about the TS9356 PKT 180 and is the answer not in the manual?
Questions and answers