Delay Start - Miele W 4449 WPS LIQUIDWASH Operating Instructions Manual

With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 30 minutes up to a maximum of
24 hours, allowing you to make use of
night-time economy electricity rates, for
example.
The current time of day needs to
have been set for delay start to work
correctly.
To select delay start
A After selecting the programme, press
the Delay start button.
The display shows the start time: from
xxx, the time for the programme to end:
to xxx, and the current time.

Delay start

from 9:05
Change
B Use the left hand Menu button under
Change to select the time you want
the programme to end at.
9:05
to 10:49
Back A
The first press on the button will adjust
the programme end time to the next
half or full hour. Each subsequent press
on the button will change the
programme end time by 30 minutes.
Delay start
from 16:16
Change
C Confirm the time you require by
pressing the right hand Menu button
under OK.
To begin delay start
D Press the Start/Stop button.
Cottons
Start in:
60°C
The display will show how long until the
programme starts. It will count down
and start automatically when the delay
start time has elapsed.
The estimated programme duration will
then appear in the display.
The actual load size can only be
determined accurately by the
machine once the programme has
started. The programme end time
may, therefore, be a bit later or
earlier than first indicated.
Delay start
9:05
to 18:00
OK
7:11
h
1600 rpm
27