Miele W 4449 WPS LIQUIDWASH Operating Instructions Manual page 15

^ Press the Automatic dispensing
button.
Normal soiling
0 0 ml
0
*
^ Enter a dosage of 100 ml. Enter the
first number with the left hand Menu
button under *. Confirm your
selection of this number by pressing
the right hand Menu button under
OK. Now enter the second number.
^ Repeat this process until all three
numbers have been entered.
The display will change to show the
degree of soiling.
Degree of soiling
s
Normal
Continue
^ Use the left hand Menu button under
Continue to select Very heavy and
confirm this with the right hand Menu
button under OK.
^ Press the Start/Stop button.
The dosage you have set here only
applies to priming the liquid
detergent dispensing system. You
will need to set the dosage level to
that recommended by the
manufacturer of the detergent you
are using.
Before using for the first time
^ At the end of the programme, the
OK
^ Switch off the washing machine.
OK
washing machine and dispensing
system are ready for use.
There may still be air bubbles in the
dispensing tube. However these will
not affect the functioning of the
system.
After the washing machine and
liquid detergent dispensing system
have been prepared for use, you will
need to set the dosage level
recommended by the
manufacturer of the detergent you
are using, see the following page.
15