Miele W 4449 WPS LIQUIDWASH Operating Instructions Manual page 63

Fitting the base
,
Only use the screws supplied
to secure the dispensing unit to the
lid of the washing machine.
Using different screws could
damage the washing machine.
The tube must be attached to the
outlet underneath the base before the
base is screwed into position.
^ Use a thin screwdriver to remove the
two rubber stoppers.
Installation and connection
^ Secure the base to the lid of the
washing machine by hand, using the
screws supplied.
^ Place the rubber stoppers in the
holes (this time from above).
^ Now place the container onto the
base and push it down firmly.
63