Problems With The Automatic Liquid Detergent Dispensing System - Miele W 4449 WPS LIQUIDWASH Operating Instructions Manual

Problems with the automatic liquid detergent dispensing
system
Problem
No liquid detergent
has been dispensed.
Using automatic liquid
detergent dispensing
does not give the
required result.
Possible cause
The liquid detergent
container and tube are
empty.
The tube is kinked or
squashed.
The Automatic
dispensing button has
not been activated.
If none of the above is the case, call the Service
Department.
Not enough liquid
detergent was
dispensed.
The dosage level has
been set too low.
Problem solving guide
Remedy
Add liquid detergent to the
container and fill the tube with
liquid detergent as described
in "Before using for the first
time - Priming the liquid
detergent dispensing system".
Make sure you remember to
refill the liquid detergent
container in good time.
Position the tube so that it is
free of kinks.
The indicator light for the
Automatic dispensing button
will come on when the button
is pressed.
Check whether the opening in
the lid of the container has
become clogged.
Increase the dosage level and
select a higher degree of
soiling setting, if necessary.
47