Liquid Detergent Dispensing; How Automatic Liquid Detergent Dispensing Works; Dosage Level - Miele W 4449 WPS LIQUIDWASH Operating Instructions Manual

Liquid detergent dispensing

How automatic liquid detergent
dispensing works
If you start a programme using auto-
matic dispensing, the washing machine
will calculate how much detergent to
dispense according to the dosage level
set, the amount of laundry in the drum
and the degree of soiling specified.
This means that the correct amount of
detergent for the load will be dispensed
automatically.
If the Pre-wash extra option has been
selected, the washing machine will
automatically divide the amount of
detergent to be dispensed into the
correct proportions for the pre-wash
and the main wash.
the pre-wash and

Dosage level

Follow the manufacturer's
recommendation for normally soiled
laundry given on the packaging.
The water hardness level of the local
water supply must also be taken into
account.
Setting the dosage level
^ Close the drum door.
^ Switch on the washing machine.
16
1
/ will be used for
3
2
/ for the main wash.
3
^ Press both menu buttons at the same
time until the following appears in the
display:
Settings
Language F
Continue
You are now in the Settings menu.
^ Press the left hand Menu button
under Continue until the Detergent
dosage setting appears and confirm
your selection of this by pressing the
right hand Menu button under OK.
Normal soiling
0 0 ml
1
*
^ Now enter the dosage level required,
e.g. for 90 ml, enter the numbers 090.
^ Enter the first number with the left
hand Menu button under *. Confirm
your selection of this number by
pressing the right hand Menu button
under OK. Now enter the other
numbers.
Your machine has now been set up for
automatic detergent dispensing.
OK
OK