Priming The Liquid Detergent Dispensing System - Miele W 4449 WPS LIQUIDWASH Operating Instructions Manual

Before using for the first time
For safety reasons, spinning is not
possible until the machine has been
set up for using for the first time. To
activate the spinning function you
must run a wash programme without
laundry.
This will also fill the dispensing
system tube with liquid detergent.
Priming the liquid detergent
dispensing system
See "Installation and connection -
Dispensing unit" for instructions on
how to install and connect the
dispensing unit.
,
The container is designed for
liquid detergent only. Filling it with
other agents, e.g. bleaching agents
or powder detergent will damage
the washing machine and/or the
laundry.
Adding detergent
^ Lift the container off its base, if
necessary.
The container has a valve in the bottom
which closes automatically when it is
removed from its base.
^ Open the lid of the container.
14
^ Add liquid detergent up to a
maximum of 1 cm below the top rim
(approx. 5 litres).
^ Close the lid so that the liquid
detergent does not dry out and to
prevent any foreign objects getting
into the container.
^ Place the container back on its base
and press it down firmly to open the
valve in the bottom.
Filling the dispensing tube with
detergent
^ Press the Delicates programme
button.
Delicates
Duration:
40°C
^ Press the left hand Menu button
under 40°C.
Delicates
Duration:
30°C
x
^ Press the left hand Menu button
repeatedly until 60°C appears.
Delicates
Duration:
60°C
0:59
h
600 rpm
0:59
h
600 rpm
1:19
h
600 rpm