Advertisement
Advertisement
Table of Contents
Related Manuals for Knightsbridge LFCOB24WW
Summary of Contents for Knightsbridge LFCOB24WW
- Page 1 INSTALLATION & MAINTENANCE MANUAL LFCOB24WW / LFCOB24CW LFCOB24DL...
-
Page 2: General Instructions
These instructions should be used to aid installation of the following products: LFCOB24WW / LFCOB24CW / LFCOB24DL SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. - Page 3 The LED flex is not going to be installed in a position where it is at risk of being cut, Provide power to the required point of installation • trapped, or damaged • Decide on the desired layout of the LED Flex taking into consideration the following: The total maximum length does not exceed the maximum power rating of the LED driver The cables are long enough to connect to the driver •...
-
Page 4: Warranty
WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing. Irreparable damage will occur if this instruction is not followed. GENERAL The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire should be replaced. -
Page 5: International Contact Details
INTERNAT CONTACT D INTERNATIONAL CONTACT DETAILS -20°C~ 45°C ML Accessories Limited LU5 4LT www.mlaccessories.co.uk AVDEC21_V1...
Need help?
Do you have a question about the LFCOB24WW and is the answer not in the manual?
Questions and answers