Page 2
These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: WW15C / WW40C SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
Page 3
Part code Cut-out (mm) Part code Cut-out (mm) Part code Cut-out (mm) WW15C Fig.1 WW15C WW40C WW15C WW40C WW40C Fig. 1 • Connect the driver to the mains supply ensuring that correct polarity is observed (see Fig.2): L – Live (Brown), N –...
Page 4
• With the aid of a flat-head screwdriver, adjust the luminaire to the desired angle (see Fig. 3 Fig .3 Fig. 3 • Connect the luminaire to the LED driver via the plug and socket Connect the luminaire to the LED driver via the plug and socket •...
Page 5
GENERAL The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire should be replaced. Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the product.
Page 6
INTERNAT CONTACT D INTERNATIONAL CONTACT DETAILS 35°C ML Accessories Limited LU5 4LT AVSEP21_V3 www.mlaccessories.co.uk...
Need help?
Do you have a question about the WW15C and is the answer not in the manual?
Questions and answers