Download Print this page

Installation: Frost Filters - ADJ MOD STQ User Instructions

Hide thumbs Also See for MOD STQ:

Table of Contents

I N S TA L L AT I O N : F R O S T F I LT E R

The MOD STQ comes with 3 interchangeable frost filters. The degree of the individual filters is stamped

into the corner of each filter. To install the frost filter, unscrew the four thumb screws holding the lens

in place. Remove the lens and install the filter inside the unit. Line up the thumb screw holes on the

edges of filter with screw holes of the unit. Screw the thumb screws back into place securing the frost

filter and lens.

Filter

Table of Contents

Need help?

Do you have a question about the MOD STQ and is the answer not in the manual?

Mod245