Transfer Switch Options; Grounding Kits - Multilink EP 1100 Installation & Operation Manual

8.04

Transfer Switch Options

The Safety Automatic Transfer Switch (SATS) provides automatic voltage detection for utility line power,
UPS output power, and Generator backup power. The SATS may be used with the EP1100 power supply to
provide bypass and maintenance capability as well, without load interruption. Alternatively, the Standard
Transfer Switch (STS) provides automatic voltage detection for Line and UPS output power and bypass and
maintenance capabilities. Both transfer switches are universal for line interactive power supplies.
010-505-20: Safety Automatic Transfer Switch. Provides auto transfer, generator hookup, and maintenance
bypass without loss of power to the load.
010-506-20: Standard Transfer Switch. Rack mounted. Provides maintenance bypass without loss of power
to the load.
010-507-20: Standard Transfer Switch. Wall/Door mounted. Provides maintenance bypass without loss of
power to the load.
8.05

Grounding Kits

If desired or required by state law, grounding kits are available to provide an isolated grounding point on
the EP1100 UPS.
035-006-11: Ground lug kit.
Multilink Inc. 580 Ternes Ln. | Elyria,OH 44035 | 440.366.6966 | www.gomultilink.com
52
© Multilink Inc. 2020 • All Rights Reserved