Section 7: Power Supply Shutdown
If power supply shutdown becomes necessary at any time, observe the following procedure:
1. Operate the Input breaker to the OFF (O) position or operate the circuit breaker serving AC utility
power to the supply to the OFF position.
2. Shut off the battery breaker and disconnect the battery harness from the battery receptacle on
the front panel of the UPS.
3. If in use, operate the UPS Input circuit breaker on the Safety Automatic Transfer Switch (SATS) or
Standard Transfer Switch (STS) to the OFF (O) position.
The UPS is now shutdown.
Section 8: Options
The EP1100 power supply supports several additional options listed below. The options and accessories
listed enhance the usefulness and longevity of the power supply system. Part numbers are listed as single
piece ordering options.
8.01
UPS Packages
EP1100 UPS packages contain the required equipment for a complete, turnkey power supply solution. The
kit contains an EP1100 UPS, transfer switch, battery harness kit, temperature probe, pluggable terminal
blocks, and this instruction manual. Battery options are available but are not included in the UPS packages.
Please contact Multilink Inc. for available options.
8.02
Battery Cable Kits and Accessories
The following battery cable kits have been designed for 48VDC applications. All harnesses are terminated
using Anderson SB50 housings and mating contacts.
870-230-50: 48V harness with 4, interconnect harnesses. Hardware included.
538-531-10: Battery terminal covers. Sold in pairs of black and red.
8.03
Battery Heater Mat
In harsh climates where freezing temperatures can shorten the life of the batteries, Multilink has designed a
battery mat option for various battery string and cabinet shelf applications.
176-003-10: 2-Battery Heater Mat with thermostat for dual battery shelf cabinets. 13" X 14"
Multilink Inc. 580 Ternes Ln. | Elyria,OH 44035 | 440.366.6966 | www.gomultilink.com
Power Supply Shutdown
Options
© Multilink Inc. 2020 • All Rights Reserved
51
Need help?
Do you have a question about the EP 1100 and is the answer not in the manual?
Questions and answers