Table of Contents
Advertisement
2.08
Unpacking and Inspection
Before installing this equipment, inspect the power supply for shipping damage or missing components. If
the power supply or other items were damaged in shipment, file a damage claim with the shipping compa-
ny and contact a Multilink representative immediately. Be sure to retain the original shipping carton and all
packing material for the power supply until it is certain that a warranty return will not be required.
2.09
All EP1100 Line Interactive UPS' Include
• 1 Power supply, ready for installation in cabinet
• 1 Battery temperature sensor cable
• 1 48VDC battery harness
• 8 dry contact relay connectors
• 1 Installation and operating instructions
2.10
Missing or Damaged Items
If items are found to be damaged or missing, contact the shipping company and a Multilink representative
immediately. All damage claims must be filed with the shipping company conveying the equipment. A Mul-
tilink representative will be able to assist with immediate equipment needs if necessary.
2.11
Original Shipping Container
When returning a power supply for service, use its original shipping container and all original packing ma-
terials. Items damaged as a result of improper packaging will not be covered under provisions of warranty
service.
2.12
Other Items
If other items such as batteries and cable kits for use with the power supply have been ordered, also ensure
that those items did not sustain shipping damage. As with the power supply itself, all damage claims must
be filed with the shipping company and a Multilink representative should be contacted immediately.
Multilink Inc. 580 Ternes Ln. | Elyria,OH 44035 | 440.366.6966 | www.gomultilink.com
10
© Multilink Inc. 2020 • All Rights Reserved
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the EP 1100 and is the answer not in the manual?
Questions and answers