Bradley OmniDeck 5000 Series Installation Manual
  1. Manuals
  2. Brands
  3. Bradley Manuals
  4. Plumbing Product
  5. OmniDeck with WashBar 5000 Series
  6. Installation manual

Bradley OmniDeck 5000 Series Installation Manual

With washbar
Hide thumbs Also See for OmniDeck 5000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Scan or click code to view
Installation Guide (French)
Read the instructions in this manual before
beginning installation. Save these instructions
and refer to them for inspection, maintenance,
and troubleshooting information.
For questions regarding the operation, installation or maintenance of this
product, visit bradleycorp.com or call 800.BRADLEY (800.272.3539).
Product warranties and parts information may also be found under
"Resources" on our website at bradleycorp.com.
215-1869 Rev. R: ECO 23-08-045
© 2023 Bradley
Page 1 of 45
11/8/2023
Shown with WB1
Shown with WB2
Scan or click code to view
Installation Guide (Spanish)
Installation
LD-5010
OmniDeck
with WashBar
™

Table of Contents

Safety Information ............................................................2
Supplies Required ............................................................2
Tools Required ..................................................................2
Components .....................................................................3
Dimensions .......................................................................7
Rough-Ins .......................................................................16
Drain Assembly ...............................................................19
WashBar Installation ......................................................19
Aerator Installation .........................................................20
Control Box .....................................................................21
Soap Supply Connections .............................................22
Top Fill Soap - Tank Assembly (Part 1) .........................22
Top Fill Soap - Tank Assembly (Part 2) .........................26
Soap Container Bracket .................................................27
Strainer and Standard Drain Cap ..................................28
Strainer and Slotted Drain Cap .....................................28
Dryer Motor Assembly ...................................................29
Attach Supply Power Enclosure ....................................30
Control Box and Valve Installation ................................30
Top Fill Soap - Soap Installation ...................................31
Bottom Fill Soap - Soap Installation .............................34
Adjust Temperature with Water Running ......................37
Access Panel ..................................................................38
Master Control Box ........................................................39
Software Update .............................................................43
Cycle Counts on LCD Display .......................................43
Cleaning and Maintenance ............................................44
Dispenser Maintenance .................................................45
Menomonee Falls, WI 53052 USA
800 BRADLEY (800 272 3539)
bradleycorp.com
- 5000 Series
™
P.O. Box 309
+1 262 251 6000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniDeck 5000 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Bradley OmniDeck 5000 Series

Summary of Contents for Bradley OmniDeck 5000 Series

  • Page 1: Table Of Contents

    Cleaning and Maintenance ..........44 For questions regarding the operation, installation or maintenance of this Liquid Soap Recommendations and product, visit bradleycorp.com or call 800.BRADLEY (800.272.3539). Dispenser Maintenance ..........45 Product warranties and parts information may also be found under “Resources” on our website at bradleycorp.com.

  • Page 2: Safety Information

    • ⁵⁄₁₆" nut driver • Tape measure • ⁵⁄₁₆" socket (with or without extension) • Phillips screw driver • Construction adhesive suitable for solid surface, forming a strong permanent bond • Flat head screw driver Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 3: Components

    (S39-845) (S45-2880) Plastic P-Trap (269-1697) (Used for brushed motor only) #10 x ³⁄₈" Screw (2x) (P18-054) DC Lead Free Valve DC Lead Free Valve Assembly, Single TMA Assembly, Single TL (S08-2401TMA) (S08-2401TL) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 4 Aerator 0.50 GPM (S05-175) Aerator 0.35 GPM (S05-215) Nut, WashBar, 1³/₈-18 (Aerators are shipped loose in bag (110-256) with red service key) Spacer, Custom WB2 (182-142) Union Elbow Nut, WashBar, 1³/₈-18 (269-2531) (110-256) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 5 Dryer Motor Components – Brushless Motor (July 2023-present) Hose Clamps - 2-1/2" Dia (269-678) Flexible PVC Dryer Tube (269-2561A) Exit Nozzle, Brushless Blower (S65-527) Dryer Motor (S39-863) Hook and Loop Strap (269-2574) Dryer Vibration Pad 4" x 10" (124-105) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 6 A14-027-BR (Brushed Brass) (P15-530) A14-027-BS (Brushed Stainless) A14-027-BZ (Brushed Bronze) Power Supply Battery Pack w/ Batteries WashBar Top Fill (A14-030) Soap Pump (Foam w/Tube) (P15-587) WashBar Top Fill Soap Pump (Liquid w/Tube) (P15-565) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 7: Dimensions

    Foam Pump with Internal Press Fit Connection (269-2519) Gallon Jug (S65-528) (May be supplied by others) Hook & Loop Strap (269-2574) Soap Tank Bracket (140-1171) Dimensions (mm) 15½" (394) 13¼" (337) 12" (305) 6⁵⁄₈" (168) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 8 (79) (67) 5" 20½" 11½" (127) (521) (292) Top Fill Soap Option 13½" (343) 21⁵⁄₈" (549) 30" (762) Front View 5" 5" 5" 5" (127) (127) (127) (127) 19¹⁄₈" (485) 22½" (571) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 9 11" (279) 4x Ø 1⁷⁄₁₆" (36) 10¾" (273) 5" 11½" (127) (292) 20½" (521) 21⁵/₈" (549) 60" (1524) Front View 5" 5" (127) (127) 5" (127) 5" (127) 19¹⁄₈" (485) 22½" (571) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 10 13½" (343) 6x Ø 1⁷⁄₁₆" (36) 3¹/₈" (79) 11" (279) 10¾" (273) 5" (127) 20½" 11½" (521) (292) Front View 5" 5" (127) (127) 5" (127) 5" (127) 19¹/₈" (485) 22½" (571) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 11 11" 8x Ø 1⁷⁄₁₆" (36) 3¹/₈" (79) (279) 10¾" 5" (273) 20½" (127) 11½" (521) (292) 21⁵/₈" (549) Front View 5" 5" (127) (127) 5" (127) 5" (127) 19¹/₈" (485) 22½" (571) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 12 17" (432) 17" (432) Deck depth must be 20½" minimum for ADA, Deck depth must be 20½" minimum for ADA, Enhanced Reach depth is only 20½" Enhanced Reach depth is only 20½" Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 13 (200) (720) (200) 14⁷⁄₈" 14¹¹⁄₁₆" (373) (372) 9¹⁄₁₆" 9¹⁄₁₆" (230) (230) 16¹⁵⁄₁₆" (430) 16¹⁵⁄₁₆" (430) Deck depth must be 21" minimum for CSA Deck depth must be 23½" (597) minimum for QBC Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 14 Deck depth must be 20½" minimum for ADA, Deck depth must be 20½" minimum for ADA, NO enhanced reach at minimum depth of 20½" NO enhanced reach at minimum depth of 20½" Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 15 7⁷⁄₈" (200) (200) 14¹¹⁄₁₆" 14⁷⁄₈" (372) (373) 9¹⁄₁₆" 9¹⁄₁₆" (230) (230) 16¹⁵⁄₁₆" (430) 16¹⁵⁄₁₆" (430) Deck depth must be 21" minimum for CSA Deck depth must be 23½" (597) minimum for QBC Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 16: Rough-Ins

    RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE 34" No Adjustment Standard Height ADA and TAS Subtract 3" Juvenile ADA and TAS 33¹⁄₁₆" Subtract ¹⁵⁄₁₆" BCBC and QBC 34¹⁄₁₆" Add ¹⁄₁₆" 33⁷⁄₈" Subtract ⁷⁄₈" Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 17 RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FIXTURE STYLE 34" No Adjustment Standard Height ADA and TAS Subtract 3" Juvenile ADA and TAS 33¹⁄₁₆" Subtract ¹⁵⁄₁₆" BCBC and QBC 34¹⁄₁₆" Add ¹⁄₁₆" 33⁷⁄₈" Subtract ⁷⁄₈" Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 18 *If no GCFI outlet is provided, contact a licensed electrician to ensure proper electrical connections in accordance with local building codes. Troubleshooting and internal maintenance must be performed by qualified service personnel. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 19: Drain Assembly

    LED Cable (Gray), Soap Sensor Refer to page 4. Cable (Shorter Cable) and Air/Water Cable (Longer Cable) Attach the ¹⁄₄" supply tube to the ¹⁄₄" union elbow. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 20: Aerator Installation

    WB1 is shown for these instructions. Carefully thread the aerator into the WashBar casting using the red service key provided. Ensure no leaks after installation. Aerator (0.35 gpm or 0.5 gpm) Red Service Key Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 21: Top Fill Soap - Mount Tank Assembly & Control Box

    Use the supplied mounting screws (or suitable Mounting mounting hardware) to attach the control box Holes assembly in place. Appropriate fastener anchors and mounting hardware must be used when mounting the control box assembly in the desired surface. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 22: Top Fill Soap - Control Box & Soap Supply Connections

    Sensor (Black) Low Soap Level Sensor (Red) Power Supply Connection Hook & Loop Strap Soap Tank Remove hook & loop strap allowing the soap tank to be removed from the mounting bracket. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 23 Fill Port Screws Using sealant appropriate for quartz or solid Fill Port surface material when installing the fill port ring is Screws recommended. Fill Port Hub Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 24 Thread the mounting nut onto the fill port hub assembly. Hand-tighten or torque to 24 in-lb. Fill Port Hub Assembly Spacer Mounting Bracket Mounting Wall Fastener Slot Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 25: Bowl Mounting With Washbar (To Bracket And Wall)

    Bracket locations and quantities bracket shown). vary depending on the deck layout. Continue to Step 8 for top fill soap option installation instructions. Continue to Step 9 for bottom fill soap option installation instructions. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 26: Top Fill Soap - Tank Assembly (Part 2)

    Reconnect Soap Sensors & LED Connector LED Connector (White) Soap Overflow Sensor (Black) Low Soap Level Sensor (Red) Top Fill Multi-Feed Power Harness from Power Supply Soap Pump Control Box Connection Continue to Step 10. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 27: Bottom Fill Soap - Attach Soap Motor

    Remove the gallon soap container by Soap swinging it away from the wall and lowering Container it from the soap syphon tube. Store soap container for later installation. Continue to Step 10. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 28: Strainer And Standard Drain Cap

    Trough Strainer Install the trough strainer and slotted drain cap as shown. Secure in place using the #10 x 1½" supplied vandal screws. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 29: Dryer Motor Assembly

    GFCI Outlet Dryer Motor Feet Dryer Vibration Supply Power Enclosure RJ45 Input Jack (for cable from master control) 12V Output Connector (for barrel end adapter cable (not shown) to master barrel control) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 30: Attach Supply Power Enclosure

    For the TL option, only connect tempered supply. Continue to Step 14 for top fill soap option installation instructions. Continue to Step 15 for bottom fill soap option installation instructions. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 31: Top Fill Soap - Soap Installation

    (located at the end of the soap supply system). Install the soap supply valve in the proper flow direction as shown on the valve. Use the extra tubing when cleaning and/or maintaining the soap system. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 32 LD-5010 Installation OmniDeck 1-Person Soap Tubing Layout Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 33 If top fill soap is included, be sure to download the latest software revision in order to disable the cycle count on the WashBar. Refer to the Software Update section on page 43. Continue to Step 16. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 34: Bottom Fill Soap - Soap Installation

    Top Flange Cable Tie Slot Cable Tie Hook and Soap Container Loop Strap Bracket Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 35 LD-5010 Installation Control Box Connection Location of the Top Fill Soap Power Source Tank Assembly Connection Connection Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 36: Electrical Connections - Brushless Motors

    Make (3) connections to the DC valve plug, the soap motor control box, and the dryer motor. After all connections are made, reference Master Control Box: System Startup section later in this manual. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 37: Adjust Temperature With Water Running

    (do not remove). Using cover, turn cartridge gently until desired water temperature is reached. Do not turn past stops as this may damage unit. Push cover down and tighten screw. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 38: Access Panel

    Do not remove properly. Check for water leaks. thumb screws. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 39: Master Control Box

    If any of the WashBar LEDs flash RED, check for sensor obstruction. After obstruction is removed or cleaned, the WashBar LEDs will return to blue indicating that the WashBar is in Standby/Idle Mode. • The power LED on the master control box will be GREEN indicating the unit has power. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 40 Dryer, water, or soap has timed-out. This is caused by a Remove obstruction or wipe sensors with microfiber obstructed sensor. cloth to prevent from scratching sensor. System will return operational automatically once cleared. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 41 • LED Off: Disables low soap counter (may not be available for all models). • No LED: WashBar with Top Fill Soap (Low soap indicator is disabled. WashBar will ignore soap counter and low soap indicator will not show LED status on WashBar.) Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...
  • Page 42 LED lights may flash and cycle different colors. To reset the WashBar, only remove hands once all LED lights are solid green. 24 Hour Water Purge If water has not been used within 24 hours, the WashBar will automatically run water for 5 seconds. This is not configurable by the user. Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 43: Software Update

    Cycle counts are displayed x1000 (ex. 65 = 65,000) • REV followed by the software revision • SOP followed by the soap cycle count • H2O followed by the water cycle count • AIR followed by the dryer cycle count Bradley • 215-1869 Rev. R: ECO 23-08-045 11/8/2023...

  • Page 44: Cleaning And Maintenance

    For complete instructions on this additional maintenance, visit bradleycorp.com. Repair Kits: Terreon repair kits are available. Contact your Bradley representative or distributor for part numbers and pricing. Repair kits are made to order and have a shelf life of 30 days.

  • Page 45: Liquid Soap Recommendations And Dispenser Maintenance

    Soap thickness is determined by a measurement called viscosity. Soap viscosity should be between 100 cps (centipoise) and 2500 cps for all Bradley soap dispensers. Thick soaps flow slower and inhibit the “flushing” action of the valves, which allows the soap to congeal in the valve and cause clogs.

This manual is also suitable for:

Omnideck ld-5010

Table of Contents