1. Manuals
  2. Brands
  3. Bradley Manuals
  4. Plumbing Product
  5. Bradmar 700 Series
  6. Installation manual

Bradley 700 Series Installation Manual

Phenolic privacy restroom partitions, floor-to-ceiling
Hide thumbs Also See for 700 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
For 69", 72" & 69"/72" Tall
Doors and Panels Only
Read the instructions in this manual before beginning installation. Save these instructions
and refer to them for inspection, maintenance, and troubleshooting information.
For questions regarding the operation, installation or maintenance of this product, visit bradleycorp .com
or call 800 .BRADLEY (800 .272 .3539) .
Product warranties and parts information may also be found on our website at bradleycorp .com .
*HDWC-INSTR-045*
HDWC-INSTR-045 Rev. A: ECO 20-14-002S
© 2021 Bradley
Page 1 of 33
6/25/2021
Installation
Phenolic Privacy Restroom Partitions,
Floor-to-Ceiling - Series 700

Table of Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Supplies Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Hardware Provided . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Example of Submittal Drawing . . . . . . . . . . . . . . . . . . . . .3
Door Descriptions & Part Numbers . . . . . . . . . . . . . . . . .4
Pilaster Descriptions & Part Numbers . . . . . . . . . . . . . . .5
Pilaster Configurations & Part Numbers . . . . . . . . . . . . .6
Layout Dimensions for Brackets . . . . . . . . . . . . . . . . . . .9
Mounting Brackets to Wall . . . . . . . . . . . . . . . . . . . . . . .10
Leveling Screws to Pilaster . . . . . . . . . . . . . . . . . . . . . .11
Mounting Brackets to Pilaster . . . . . . . . . . . . . . . . .12-13
Pilaster Mounting Hardware . . . . . . . . . . . . . . . . . .13-14
Pilasters and Panels . . . . . . . . . . . . . . . . . . . . . . . .15-18
Wall-Hung Pilasters . . . . . . . . . . . . . . . . . . . . . . . . .19-22
Pilaster Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
Door Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-31
Urinal Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33
Menomonee Falls, WI 53052 USA
800 BRADLEY (800 272 3539)
P.O. Box 309
+1 262 251 6000
bradleycorp.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 700 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Bradley 700 Series

Summary of Contents for Bradley 700 Series

  • Page 1: Table Of Contents

    For questions regarding the operation, installation or maintenance of this product, visit bradleycorp .com or call 800 .BRADLEY (800 .272 .3539) . Product warranties and parts information may also be found on our website at bradleycorp .com .

  • Page 2: Safety Information

    Separate parts from packaging and make sure all parts are accounted for before discarding packaging material . If any parts are missing, do not begin installation until you obtain the missing parts . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 3: Supplies Required

    60-1/2" (1537) 36" (914) Wall to Centerline Center to Center 1" (25) 61-1/4" (1556) to Face 1/2" (13) 3" 20-1/2" 1" (25) 36" 24" 24" 10" 3" (76) (914) (610) (610) (254) Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 4: Door Descriptions & Part Numbers

    Right Hinge In / Left Hinge Out, W/Latch Holes Hinge Out, W/Latch Holes Outside of Stall C490-XX69NSIRH-XXXX C490-XX69NSILH-XXXX Left Hinge In / Right Right Hinge In / Left Hinge Out, W/Latch Holes Hinge Out, W/Latch Holes Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 5: Pilaster Descriptions & Part Numbers

    No-Site Alcove, No-Site Wall, Right Hinge In / Left Latch In / Right Latch In / Left Hinge In / Left Hinge Out Right Latch Out Left Latch Out Right Hinge Out Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 6: Pilaster Configurations & Part Numbers

    No-Site, Right Hinge In & Left Hinge In Left Hinge In / Right Hinge Right Latch In / Left Latch Out Left Hinge Out & Left Hinge Out Out & Left Hinge Out Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 7: Pilaster Configurations & Part Numbers - 69"/72

    Right Hinge In 69" & Right Hinge Out 72" & Right Hinge In 72" & Left Hinge In 72" Left Hinge In 69" Left Hinge In 72" Left Hinge In 69" Left Hinge Out 69" Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 8: Pilaster Configurations & Wall Hung Part Numbers

    No-Site Wall, No-Site Wall, Left Latch In / Right Latch In / Right Hinge In / Left Hinge In / Right Latch Out Left Latch Out Left Hinge Out Right Hinge Out Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 9 "A1" ("B") . Repeat this step for each panel, starting each measurement from the last panel centerline ("B1") . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 10 2" (51) deep) at each hole location . Insert the plastic anchors in all holes and secure the brackets to the wall with the 'Ear' U-Bracket #14 x 2" screws provided . Bracket Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 11: Leveling Screws To Pilaster

    18"–24" Pilaster: Drill (2) Ø17/64" pilot holes, 1-1/2" (38) deep . Holes should be 2" (51) off each end of the pilaster . Use leveling screw(s) to adjust height of pilaster . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 12 "B" Secure the continuous bracket to the pilasters using the #14 x 5/8" screws provided . Bottom of Bracket Refer to the submittal drawing for the correct orientation of the pilaster . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 13: Pilaster Mounting Hardware

    . Insert plastic anchors into the holes and secure the shoe to the anchors using the 9/32" x 5/8" flat washer and #14 x 2" screws provided . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 14 6"–24" Pilasters: Place (2) L-brackets bracket to the ceiling with the #14 x 2" screw 1/2" (13) in from each outer edge line and flush provided . with the projected inside face line . 1/2" (13) Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 15 Secure the pilaster to the bracket using the the bracket using the #10-24 x 1/2" barrel nuts and #10-24 x 1/2" barrel nuts and #10-24 x 3/4" shoulder #10-24 x 1/2" shoulder screws provided . screws provided . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 16: Pilasters And Panels

    Using the bracket as a template, drill Ø1/4" holes through the bottom panel at each panel bracket hole . Secure the panel to the bracket using the #10-24 x 1/2" barrel nuts and #10-24 x 1/2" shoulder screws provided . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 17 Using the bracket as a template, drill Ø1/4" holes through the panel at each panel bracket hole . Secure the panel to the bracket using the #10-24 x 1/2" barrel nuts and #10-24 x 3/8" machine screws provided . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 18 Using the bracket as a template, drill Ø1/4" holes through the bottom panel at each panel bracket hole . Secure the panel to the bracket using the #10-24 x 1/2" barrel nuts and #10-24 x 3/8" machine screws provided . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 19 . orientation of the pilaster . Notch indicates Notch indicates bottom of bottom of pilaster . pilaster . Pilaster Plumb Line 9" Ref . 9" Ref . (229) Floor (229) Floor Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 20 . of the pilaster . Notch indicates Notch bottom of indicates pilaster . bottom of pilaster . Pilaster Plumb Line 6" Ref . 6" Ref . (152) (152) Floor Floor Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 21: Wall-Hung Pilasters

    . of the pilaster . Notch indicates bottom of Notch indicates pilaster . bottom of pilaster . Pilaster Plumb Line 9" Ref . 9" Ref . (229) Floor (229) Floor Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 22 . of the pilaster . Notch indicates bottom of pilaster . Notch indicates Pilaster Plumb Line bottom of pilaster . 6" Ref . 6" Ref . (152) Floor (152) Floor Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 23: Pilaster Shoes

    Using the hole in the bottom shoe as a template, drill a Ø1/4" hole through the pilaster . Secure the pilaster to the bottom shoe using the #10-24 x 1/2" barrel nut and #10-24 x 3/4" shoulder screw provided . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 24: Hinges

    Hinge Leaf Hinge Pin with Teeth without Teeth Any Hand (3) Any Hand (3) Top Hinge/ Middle Hinge (with Hinge Cam) Pilaster Door Pilaster Side Side Side Bottom Hinge (No Hinge Cam) Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 25 . Slots on Bushing The gap between the bottom of the door and the pilaster leaf is needed for rise of the door when opened. Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 26 Pilaster Door .125" Keeper #14 x 5/8" (3 .175) Torx Screws When the door latch is correctly installed, the red indicator color should appear when the latch is in the closed position. Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 27 . Remove the second dampening strip from the liner and place the bottom edge 3" (76) up from the bottom notch, and apply pressure to adhere to the pilaster . 3" (76) Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 28 Secure the flat strike to pilaster wall using the Inswing Door #10 x 1" screws provided . Refer to Step G for installing the keeper and Step J for installing the dampening strip . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 29: Door Hardware

    ( .762) Door Keeper .125" (3 .175) #14 x 5/8" Torx Screws When the door latch is correctly installed, the red indicator color should appear when the latch is in the closed position. Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 30 Secure to the door using the #10 x 5/8" screws provided . bottom edge 3" (76) up from the bottom notch, and apply pressure to adhere to the pilaster . 3" (76) 3" (76) 3" (76) Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 31 Secure the flat strike to pilaster wall using the #10 x 1" screws provided . Flat Strike Outswing Door Refer to Step G for installing the keeper and Step K for installing the dampening strip . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...
  • Page 32 Using the bracket as a template, drill Ø1/4" holes through the urinal screen at each bracket hole . Secure the urinal screen to the brackets with the #10-24 x 1/2" barrel nuts and #10-24 x 1/2" shoulder screws provided . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

  • Page 33: Urinal Screens

    Using the bracket as a template, drill Ø1/4" holes through the urinal screen at each bracket hole . Secure the urinal screen to the bracket with the #10-24 x 1/2" barrel nuts and #10-24 x 3/8" machine screws provided . Bradley • HDWC-INSTR-045 Rev. A: ECO 20-14-002S 6/25/2021...

Table of Contents