Connecting To Individual Fpc Clis; Performing Other Operations On Individual Fpcs - Fortinet FortiGate 6000F Series System Manual

Managing individual FortiGate 6000F management boards and FPCs

Connecting to individual FPC CLIs

From the management board CLI you can use the following command to log into the CLI of individual FPCs:
execute load-balance slot manage <slot-number>
Where:
<slot> is the slot number of the component that you want to log in to. The management board is in slot 0 and the FPC
slot numbers start at 1.
When connected to the CLI of a FPC, you can view information about the status or configuration of the FPC, restart the
FPC, or perform other operations. You should not change the configuration of individual FPCs because this can cause
configuration synchronization errors.

Performing other operations on individual FPCs

You can use the following commands to restart, power off, power on, or perform an NMI reset on individual FPCs while
logged into the management board CLI:
execute load-balance slot {nmi-reset | power-off | power on | reboot | set-primary-worker}
<slots>
Where <slots> can be one or more slot numbers or slot number ranges separated by commas. Do not include spaces.
For example, to shut down the FPCs in slots 2, and 4 to 6 enter:
execute load-balance slot power-off 2,4-6
FortiGate 6000F Series 7.0.12 System Guide
Fortinet Technologies Inc.
42