Table of Contents
Advertisement
Getting started with FortiGate 6000F series
Use the following command to disable RAID:
execute disk raid disable
RAID is disabled, the disks are separated and formatted.
Use the following command to change the RAID level to RAID-0:
execute disk raid rebuild-level 0
The disks are formatted for RAID-0.
Use the following command to rebuild the current RAID partition:
execute disk raid rebuild
The RAID is rebuilt at the current RAID level.
Use the following command to show RAID status. The following command output shows the disks configured for RAID-1.
execute disk raid status
RAID Level: Raid-1
RAID Status: OK
RAID Size: 1000GB
Disk 1: OK Used 953GB
Disk 2: OK Used 953GB
FortiGate 6000F Series 7.0.12 System Guide
Fortinet Technologies Inc.
38
Advertisement
Table of Contents
Need help?
Do you have a question about the FortiGate 6000F Series and is the answer not in the manual?
Questions and answers