Table of Contents
Advertisement
From the Main Menu, select SNMP Agent Configuration. This will bring you to the
SNMP Agent Configuration menu, shown above.
SNMP Community Configuration
Select and enter the SNMP Community Configuration sub-menu. You will see the
following configuration screen:
The parameters are described below:
SNMP Community String – This community string is a user-defined identifying
name used to group together some arbitrary set of SNMP application entities
managed by the network manager.
Access Right – This element of the set {Read Only, Read/Write} is called the
SNMP access mode. If the SNMP Community String has an Access Right of
Read/Write, then that Community String is available as an operand for the get,
set, and trap operations. Otherwise, if the Community String's corresponding
Access Right is Read Only, then it is available as an operand for the get and trap
operations only.
27
DI-206 ISDN Remote Router
Advertisement
Table of Contents
