Table of Contents
Advertisement
DI-206 ISDN Remote Router
from your network. It is necessary to have good knowledge of IP protocol before
effectively configuring this filter.
Select an entry above and then press <Enter>. The following screen appears:
The IP Filter parameters are described below:
Name – This is a 12 character (maximum), alphanumeric, user-defined name,
used to identify the filter.
Direction – This defines the direction of the packet relative to the Interface
parameter below.
State – This is used to define the routing decision applied to the packet. The three
routing decisions are described:
1. forward – This allows the routing of the packet, if it has met the criteria of
the corresponding filter.
46
Advertisement
Table of Contents
