Table of Contents
Advertisement
DI-206 ISDN Remote Router
Configure NAT/NAPT
The first screen shows the complete NAT table that is defined by the network
manager:
For any NAT entry, you must configure two different screens. The first one is
accessible by positioning the cursor over the name field and hitting <Enter> (in the
window shown above, this corresponds to the field 'Branch1'). After configuring the
NAT options in the Name field, you must save the changes, EXIT, and position the
cursor over the NAT IP Pool to configure variables there.
Name Field Configuration Screen
The configuration screen for the name field appears as follows:
54
Advertisement
Table of Contents
